96 beams
An infrared sensing curtain for elevator door-opening protection, using 17 emitter/receiver pairs with up to 96 detection beams.
The transmitter and receiver are installed on opposite sides of the doorway. An interrupted beam provides an obstacle-detection signal for the elevator door-control system.
| Parameter | Specification |
|---|---|
| Model | DY-GL18-AL096 |
| Infrared diode pairs | 17 |
| Diode spacing | 118 mm |
| Maximum beams at separation > 400 mm | 96 |
| Minimum beams at separation < 400 mm | 33 |
| Highest beam | 1840 mm |
| Lowest beam | < 20 mm |
| Overall size (T × W × H) | 10 × 27 × 2000 mm |
| Detection distance | 0–4000 mm |
| Parameter | Specification |
|---|---|
| Vertical displacement at 0 mm | ±20 mm |
| Horizontal displacement at 0 mm | ±3 mm |
| Angular displacement at 50 mm | ±7° |
| NPN/PNP response time | 45 ms |
| Relay response time | 60 ms |
| Light immunity | ≥100,000 lux |
| Cable reliability | 20 million door movements |
| Operating temperature | −20 to +65 °C |
| Protection rating | IP65 |
| EMC emissions | EN12015 |
| EMC immunity | EN12016 |
| Vibration test | 10–55 Hz; 0.75 mm amplitude; 50 minutes on each X, Y and Z axis |
Align the transmitter and receiver within the permitted displacement limits and keep the optical path clear. Select the required NPN, PNP or relay output version to suit the controller input.
The maximum and minimum beam counts depend on the distance between the two curtain edges. Check the 2,000 mm overall height and the required detection distance against the doorway installation.
The exact product image shows a paired light-curtain transmitter and receiver with attached cables and plugs. This confirms the visible construction only; it does not establish ratings or hidden interfaces.
Confirm protected height, profile length, beam specification, connector type, cable length and controller compatibility.
Confirm protected height, profile length, connector and cable arrangement, supply/output interface and controller compatibility from the exact model documentation.
Các lựa chọn đóng gói bảo vệ được lựa chọn phù hợp với kích thước, trọng lượng sản phẩm và yêu cầu vận chuyển.
Từ gia công chính xác đến kiểm tra cuối cùng, mọi quy trình đều hướng tới chất lượng đồng nhất và nguồn cung ổn định.
Nguồn cung phụ tùng thang máy đáng tin cậy với dịch vụ trực tiếp từ nhà máy, chất lượng chính hãng và hỗ trợ tận tâm.
Chúng tôi cung cấp dịch vụ vận chuyển đáng tin cậy cho các đơn hàng phụ tùng thang máy trên toàn thế giới, giúp bạn nhận được đúng sản phẩm một cách nhanh chóng và an tâm.
Các phương thức giao hàng linh hoạt dành cho khách hàng trên khắp thị trường thế giới.
Các hình thức vận chuyển có thể được bố trí phù hợp với điểm đến, lịch trình và yêu cầu của đơn hàng.
Sản phẩm được đóng gói chắc chắn nhằm bảo vệ trong quá trình vận chuyển.
Đội ngũ của chúng tôi hỗ trợ điều phối giao hàng từ khi xác nhận đơn hàng đến dịch vụ hậu mãi.
Chúng tôi cung cấp các chứng chỉ, báo cáo kiểm định và tài liệu tuân thủ liên quan đến phụ tùng thang máy, giúp bạn yên tâm hơn khi mua sắm.
Choose a sales representative to discuss your project.
Loading contacts…