96 beams
An infrared sensing curtain for elevator door-opening protection, using 17 emitter/receiver pairs with up to 96 detection beams.
The transmitter and receiver are installed on opposite sides of the doorway. An interrupted beam provides an obstacle-detection signal for the elevator door-control system.
| Parameter | Specification |
|---|---|
| Model | DY-GL18-AL096 |
| Infrared diode pairs | 17 |
| Diode spacing | 118 mm |
| Maximum beams at separation > 400 mm | 96 |
| Minimum beams at separation < 400 mm | 33 |
| Highest beam | 1840 mm |
| Lowest beam | < 20 mm |
| Overall size (T × W × H) | 10 × 27 × 2000 mm |
| Detection distance | 0–4000 mm |
| Parameter | Specification |
|---|---|
| Vertical displacement at 0 mm | ±20 mm |
| Horizontal displacement at 0 mm | ±3 mm |
| Angular displacement at 50 mm | ±7° |
| NPN/PNP response time | 45 ms |
| Relay response time | 60 ms |
| Light immunity | ≥100,000 lux |
| Cable reliability | 20 million door movements |
| Operating temperature | −20 to +65 °C |
| Protection rating | IP65 |
| EMC emissions | EN12015 |
| EMC immunity | EN12016 |
| Vibration test | 10–55 Hz; 0.75 mm amplitude; 50 minutes on each X, Y and Z axis |
Align the transmitter and receiver within the permitted displacement limits and keep the optical path clear. Select the required NPN, PNP or relay output version to suit the controller input.
The maximum and minimum beam counts depend on the distance between the two curtain edges. Check the 2,000 mm overall height and the required detection distance against the doorway installation.
The exact product image shows a paired light-curtain transmitter and receiver with attached cables and plugs. This confirms the visible construction only; it does not establish ratings or hidden interfaces.
Confirm protected height, profile length, beam specification, connector type, cable length and controller compatibility.
Confirm protected height, profile length, connector and cable arrangement, supply/output interface and controller compatibility from the exact model documentation.
Protective packaging options selected according to product size, weight and shipping requirements.
From precision manufacturing to final inspection, every process supports consistent quality and reliable supply.
Reliable elevator parts supply with factory-direct service, genuine quality and dependable support.
We provide reliable shipping support for elevator parts orders worldwide, helping you receive the right products efficiently and with confidence.
Flexible delivery options for customers across global markets.
Shipping methods can be arranged according to your destination, schedule and order requirements.
Products are packed securely to help protect them during transportation.
Our team supports delivery coordination from order confirmation to after-sales service.
We provide applicable certificates, inspection reports and compliance documents for elevator parts, helping you source with greater confidence.
Choose a sales representative to discuss your project.
Loading contacts…