Resolve the suffix
Request a complete label photograph and confirm M20 × 1.5 versus M16 × 1.5 before selecting a gland, drawing or replacement.
Compact position switch with plunger actuator, screw terminals and one normally-open plus one normally-closed contact in the reviewed manufacturer versions. Confirm the complete suffix and cable-entry thread before ordering.
Four retained photographs show the same TS 236-11Z-M20 structure from different angles, including the plunger, housing, M20 label, cable-entry end and side profile. The inventory record omits the cable-entry suffix, so these photographs are presented as an M20 reference and not as proof of the exact stocked revision.
| Item | Reviewed reference | Order check |
|---|---|---|
| Inventory model | SH-TS236-11Z | Confirm manufacturer and complete suffix |
| Photographed version | Schmersal TS 236-11Z-M20 | Do not assume M20 until the supplied label is checked |
| Alternative official version | TS 236-11Z-M16, article 151172700 | M16 dimensions and entry must not be mixed with M20 |
| Actuator | Plunger; head repositionable in four 90° steps in the reviewed family information | Confirm approach direction and head orientation |
| Contact arrangement | 1 NO + 1 NC; slow action in the M16 official reference | Verify the actual terminal diagram and contact continuity |
| Connection | Screw terminals; 0.75–2.5 mm² reference range | Confirm conductor preparation and terminal access |
| Thermal current | 10 A reference | Not a universal switching-current rating |
| Operational current reference | AC-15: 4 A at 230 VAC; DC-13: 1 A at 24 VDC | Values are from the M16 official reference; confirm the supplied version |
| M20 legacy housing reference | 30 × 58.5 × 30 mm; M20 × 1.5 entry | Confirm against the current physical unit before installation |
| M16 official overall reference | 30 × 30 × 73.5 mm; M16 × 1.5 entry | Alternative version only; do not apply to an M20 unit |
| Protection reference | IP65 / IP67 in the reviewed M16 page | Confirm the exact version, gland and installed sealing |
The 10 A value is identified as thermal test current in the manufacturer data. Final switching suitability depends on utilization category, voltage, load, inrush and the exact supplied suffix.
Request a complete label photograph and confirm M20 × 1.5 versus M16 × 1.5 before selecting a gland, drawing or replacement.
Check plunger height and travel, approach direction, head orientation, housing dimensions, mounting points and entry clearance.
Verify 1 NO + 1 NC operation, terminal numbering, AC-15 or DC-13 duty, load current, inrush and protective device.
Not automatically. Their cable-entry thread differs, and the matching dimensions, gland and documentation must follow the supplied suffix.
No. The manufacturer reference identifies 10 A as thermal current. Operational switching ratings depend on utilization category and voltage.
Confirm manufacturer, full suffix, actuator geometry, housing and mounting dimensions, entry thread, terminal diagram, contact logic and real circuit duty.
제품의 크기, 무게 및 배송 요구사항에 따라 선택된 보호 포장 옵션입니다.
정밀한 제조부터 최종 검사까지, 모든 공정이 일관된 품질과 신뢰할 수 있는 공급을 뒷받침합니다.
공장 직영 서비스, 정품 품질, 믿을 수 있는 지원으로 안정적인 엘리베이터 부품 공급을 제공합니다.
전 세계적으로 엘리베이터 부품 주문에 대한 신뢰할 수 있는 배송 서비스를 제공하여, 적합한 제품을 효율적이고 안심하며 받아보실 수 있도록 지원합니다.
글로벌 시장 전역의 고객을 위한 유연한 배송 옵션을 제공합니다.
배송 방법은 목적지, 일정 및 주문 요구사항에 따라 조정 가능합니다.
운송 중 제품을 안전하게 보호하기 위해 신중히 포장됩니다.
당사 팀이 주문 확인부터 사후 서비스까지 배송 일정을 철저히 관리합니다.
엘리베이터 부품에 대한 관련 인증서, 검사 보고서 및 규정 준수 문서를 제공하여 더욱 신뢰감 있게 소싱하실 수 있도록 지원합니다.
Choose a sales representative to discuss your project.
Loading contacts…