Compact position switch with plunger actuator, screw terminals and one normally-open plus one normally-closed contact in the reviewed manufacturer versions. Confirm the complete suffix and cable-entry thread before ordering.
Four retained photographs show the same TS 236-11Z-M20 structure from different angles, including the plunger, housing, M20 label, cable-entry end and side profile. The inventory record omits the cable-entry suffix, so these photographs are presented as an M20 reference and not as proof of the exact stocked revision.
| Item | Reviewed reference | Order check |
|---|---|---|
| Inventory model | SH-TS236-11Z | Confirm manufacturer and complete suffix |
| Photographed version | Schmersal TS 236-11Z-M20 | Do not assume M20 until the supplied label is checked |
| Alternative official version | TS 236-11Z-M16, article 151172700 | M16 dimensions and entry must not be mixed with M20 |
| Actuator | Plunger; head repositionable in four 90° steps in the reviewed family information | Confirm approach direction and head orientation |
| Contact arrangement | 1 NO + 1 NC; slow action in the M16 official reference | Verify the actual terminal diagram and contact continuity |
| Connection | Screw terminals; 0.75–2.5 mm² reference range | Confirm conductor preparation and terminal access |
| Thermal current | 10 A reference | Not a universal switching-current rating |
| Operational current reference | AC-15: 4 A at 230 VAC; DC-13: 1 A at 24 VDC | Values are from the M16 official reference; confirm the supplied version |
| M20 legacy housing reference | 30 × 58.5 × 30 mm; M20 × 1.5 entry | Confirm against the current physical unit before installation |
| M16 official overall reference | 30 × 30 × 73.5 mm; M16 × 1.5 entry | Alternative version only; do not apply to an M20 unit |
| Protection reference | IP65 / IP67 in the reviewed M16 page | Confirm the exact version, gland and installed sealing |
The 10 A value is identified as thermal test current in the manufacturer data. Final switching suitability depends on utilization category, voltage, load, inrush and the exact supplied suffix.
Request a complete label photograph and confirm M20 × 1.5 versus M16 × 1.5 before selecting a gland, drawing or replacement.
Check plunger height and travel, approach direction, head orientation, housing dimensions, mounting points and entry clearance.
Verify 1 NO + 1 NC operation, terminal numbering, AC-15 or DC-13 duty, load current, inrush and protective device.
Not automatically. Their cable-entry thread differs, and the matching dimensions, gland and documentation must follow the supplied suffix.
No. The manufacturer reference identifies 10 A as thermal current. Operational switching ratings depend on utilization category and voltage.
Confirm manufacturer, full suffix, actuator geometry, housing and mounting dimensions, entry thread, terminal diagram, contact logic and real circuit duty.
製品のサイズ・重量・輸送条件に応じて選定された保護包装オプションをご提供します。
精密な製造から最終検査まで、すべての工程が一貫した品質と安定した供給を支えています。
工場直送による信頼性の高いエレベーター部品供給、純正品質と確かなサポート。
世界中でエレベーター部品のご注文に対し、確実な配送サポートをご提供。適切な商品を効率的かつ安心してお届けします。
世界各地のお客様向けに柔軟な配送オプションをご用意。
目的地やスケジュール、ご注文内容に合わせて最適な輸送手段をご提案。
輸送中の衝撃から製品を守るため、しっかりと梱包いたします。
注文確認からアフターサービスまで、配送の調整を当社チームがサポート。
エレベーター部品に関する各種証明書・検査報告書・法令遵守書類をご提供。より安心して調達いただけるようサポートいたします。
Choose a sales representative to discuss your project.
Loading contacts…
