NICE2000 series controller selection covering the supplied 7.5 kW, 11 kW and 15 kW variants. Electrical ratings, braking-resistor recommendations and shared enclosure dimensions below are transcribed from the user-supplied comparison and installation data.
| Parameter | NICE2000 7.5 kW | NICE2000 11 kW | NICE2000 15 kW |
|---|---|---|---|
| Standard controller model | NICE-E1-B-4017 | NICE-E1-B-4025 | NICE-E1-B-4032 |
| Maximum applicable motor power | 7.5 kW | 11 kW | 15 kW |
| Rated input voltage | Three-phase 380–440 V AC | ||
| Nominal input current | 20.5 A | 26.0 A | 35.0 A |
| Continuous output current | 17.0 A | 25.0 A | 32.0 A |
| Maximum rated capacity | 11 kVA | 17 kVA | 21 kVA |
| Output frequency range | 0.00–90.00 Hz | ||
| DC reactor | Built in | ||
| Recommended braking resistor | Resistance ≥ 65 Ω; power ≥ 1500 W | Resistance ≥ 45 Ω; power ≥ 2000 W | Resistance ≥ 32 Ω; power ≥ 2500 W |
Hardware safety-relay interfaces: 19 digital inputs and 12 relay outputs for safety circuits such as handrail, skirt-panel switch and comb-plate intrusion circuits.
The supplied 7.5 kW, 11 kW and 15 kW variants use the same standard compact molded enclosure and mounting-hole pattern.
| Dimension / installation item | Supplied value |
|---|---|
| Overall height (H) | 322 mm |
| Overall width (W) | 208 mm |
| Overall depth (D) | 192 mm |
| Horizontal mounting-hole spacing (A) | 190 mm, center to center |
| Vertical mounting-hole spacing (B) | 305 mm, center to center |
| Mounting-hole diameter | Φ 6.0 mm; four M5 metal combination screws recommended for vertical installation on the control-cabinet mounting plate |
| Reference net weight | Approximately 6.5 kg per unit |
Model NICE2000-7.5KW is shown as a NICE2000 drive with front keypad and ventilated enclosure. Match the complete model, physical layout and documented interfaces to the installed component before ordering.
Check complete model suffix, enclosure size, mounting, terminal layout, keypad or control option and cooling arrangement against the installed unit.
Confirm supply voltage and phase, motor power/current, feedback or communication option, braking arrangement and approved parameter set from the exact nameplate and drive schedule.
製品のサイズ・重量・輸送条件に応じて選定された保護包装オプションをご提供します。
精密な製造から最終検査まで、すべての工程が一貫した品質と安定した供給を支えています。
工場直送による信頼性の高いエレベーター部品供給、純正品質と確かなサポート。
世界中でエレベーター部品のご注文に対し、確実な配送サポートをご提供。適切な商品を効率的かつ安心してお届けします。
世界各地のお客様向けに柔軟な配送オプションをご用意。
目的地やスケジュール、ご注文内容に合わせて最適な輸送手段をご提案。
輸送中の衝撃から製品を守るため、しっかりと梱包いたします。
注文確認からアフターサービスまで、配送の調整を当社チームがサポート。
エレベーター部品に関する各種証明書・検査報告書・法令遵守書類をご提供。より安心して調達いただけるようサポートいたします。
Choose a sales representative to discuss your project.
Loading contacts…
