Product Introduction

NICE2000 Escalator Integrated Controller

Name: Nice 2000 for Escalator Inverter
SKU: SH-01200067
Price: 655.63 USD
Availability: InStock

NICE2000 series controller selection covering the supplied 7.5 kW, 11 kW and 15 kW variants. Electrical ratings, braking-resistor recommendations and shared enclosure dimensions below are transcribed from the user-supplied comparison and installation data.

NICE2000 escalator integrated controller product view.

Variant electrical specifications

Parameter	NICE2000 7.5 kW	NICE2000 11 kW	NICE2000 15 kW
Standard controller model	NICE-E1-B-4017	NICE-E1-B-4025	NICE-E1-B-4032
Maximum applicable motor power	7.5 kW	11 kW	15 kW
Rated input voltage	Three-phase 380–440 V AC
Nominal input current	20.5 A	26.0 A	35.0 A
Continuous output current	17.0 A	25.0 A	32.0 A
Maximum rated capacity	11 kVA	17 kVA	21 kVA
Output frequency range	0.00–90.00 Hz
DC reactor	Built in
Recommended braking resistor	Resistance ≥ 65 Ω; power ≥ 1500 W	Resistance ≥ 45 Ω; power ≥ 2000 W	Resistance ≥ 32 Ω; power ≥ 2500 W

Hardware safety-relay interfaces: 19 digital inputs and 12 relay outputs for safety circuits such as handrail, skirt-panel switch and comb-plate intrusion circuits.

Shared enclosure and installation dimensions

The supplied 7.5 kW, 11 kW and 15 kW variants use the same standard compact molded enclosure and mounting-hole pattern.

Dimension / installation item	Supplied value
Overall height (H)	322 mm
Overall width (W)	208 mm
Overall depth (D)	192 mm
Horizontal mounting-hole spacing (A)	190 mm, center to center
Vertical mounting-hole spacing (B)	305 mm, center to center
Mounting-hole diameter	Φ 6.0 mm; four M5 metal combination screws recommended for vertical installation on the control-cabinet mounting plate
Reference net weight	Approximately 6.5 kg per unit

Installation and selection

Select the controller model and braking resistor from the exact motor-power column.
Confirm the installed supply is three-phase 380–440 V AC and verify terminal assignment against the unit documentation before wiring.
Maintain the specified mounting-hole spacing and vertical installation arrangement.

Frequently Asked Questions

What configuration is shown for NICE2000-7.5KW?

Model NICE2000-7.5KW is shown as a NICE2000 drive with front keypad and ventilated enclosure. Match the complete model, physical layout and documented interfaces to the installed component before ordering.

Which hardware configuration determines controller or drive fit?

Check complete model suffix, enclosure size, mounting, terminal layout, keypad or control option and cooling arrangement against the installed unit.

Which electrical configuration must match?

Confirm supply voltage and phase, motor power/current, feedback or communication option, braking arrangement and approved parameter set from the exact nameplate and drive schedule.