Product Views
Four distinct product views show the front duct interfaces, side/rear heat-exchanger filters, top maintenance filters and wired controller. Original TCL markings and warning labels are retained.
FRONT ANGLE AND HEAT-EXCHANGER FILTER
REAR COIL AND FILTER ACCESS
RETURN AND OUTLET INTERFACES
WIRED DISPLAY AND POWER CONNECTION
Submitted Specification Reference
| Item | Submitted value | Buyer check |
|---|
| Model | Backend KCD-32/A-35D; graphic KC-32/A-35D | Resolve on physical nameplate |
| Cooling / input | 3100 W / 1000 W, 5.1 A | Confirm operating conditions and nameplate |
| Power supply | 220 V AC, 50 Hz | Verify site supply and protection |
| Air volume | 320 m³/h | Confirm duct resistance and openings |
| Dimensions | 482 × 580 × 356 mm | Check roof layout and service space |
| Protection / weight | IPX4, Class I / 28.8 kg | Confirm actual unit and supporting structure |
Installation Kit and Layout
SUBMITTED ACCESSORY SET — VERIFY SUPPLY SCOPE
DUCT ROUTING REFERENCE
CAR-ROOF INSTALLATION REFERENCE
Submitted duct references show a 1500 mm return duct at Ø180 mm and a 1500 mm outlet duct at Ø130 mm. Confirm actual supplied lengths, clamps, insulation and roof openings.
Buyer Confirmation Checklist
Model and electrical data
Send the complete nameplate, voltage/frequency, current, cooling/input power, refrigerant and controller label.
Roof and duct interfaces
Confirm available dimensions, support, openings, ducts, return/outlet orientation, condensate treatment and service access.
Supply scope
List unit, controller/display, filters, ducts, brackets, rails, clamps, insulation, fasteners and manuals separately.
Frequently Asked Questions
Is the model KCD or KC?
The current records conflict. Confirm the physical nameplate before quotation or replacement.
Are ducts included automatically?
No assumption should be made. Require a line-by-line supply-scope confirmation.
What must be checked after installation?
Check fixation, grounding, protection, duct sealing, airflow, controller operation, noise/vibration and car-top safety clearances.
Evidence note: Electrical and dimensional values above are extracted from the submitted product reference, not an accessible manufacturer datasheet. Final acceptance must use the supplied-unit nameplate and local engineering confirmation.
