Photoelectric Switch

Voltage:DC12V-24V;Output mode:NPN

السعر
$11.95
/قطعة
$12.32
سعر مرجعي لا يشمل التركيب والشحن، يرجى استشارة فريق المبيعات للحصول على عرض سعر دقيق
اختر الموديل
SH-GDC-3N
SH-GDC-3P
مقدمة المنتج
Product view
Technical drawing
ZH-ENG · Elevator sensing

SH-GDC-3N / SH-GDC-3P Photoelectric Level Sensor

GDC-3 elevator photoelectric level sensor with NPN and PNP selections. Only the GDC-3 configurations attached to this main link are released here.

SH-GDC-3N / SH-GDC-3P

Same GDC-3N label, rectangular U-shaped housing, cable entry, indicator and 24 mm slot geometry as the manufacturer page. The PNP model option uses the same GDC-3 mechanical envelope.

Specifications

ParameterSpecification
Supply voltageDC 12–24 V, polarity protected
Output selectionSH-GDC-3N: NPN; SH-GDC-3P: PNP
Control output<80 mA
No-load current<20 mA at 24 V
Light immunity60,000 lux
Response time≤1 ms
IndicatorLights when blocked
Protection levelIP65
Working temperature−25 to +60 °C
Storage temperature−25 to +80 °C
Relative humidity80–90% RH
Pulse interference withstand±2 kV, as listed
Overall envelope69 × 56 × 38 mm
Slot callout24 mm

Dimensions and installation

Selection questions

Which models are covered by this page?

Only SH-GDC-3N and SH-GDC-3P. Select NPN or PNP to match the controller input.

Are the mechanical dimensions shared by 3N and 3P?

Yes. The output mode changes, while the supplied GDC-3 manufacturer page uses the same 69 × 56 × 38 mm envelope.

What must be confirmed before wiring?

Confirm DC 12–24 V supply, NPN or PNP input compatibility, cable assignment and the physical slot position.

Frequently Asked Questions

What type of product is SH-GDC-3N?

SH-GDC-3N is listed as Elevator Photoswitch.

Which specifications are listed for SH-GDC-3N?

Supply voltage: DC 12–24 V, polarity protected. Output selection: SH-GDC-3N: NPN; SH-GDC-3P: PNP. Control output: <80 mA.

What should be checked before ordering SH-GDC-3N?

Confirm the complete model suffix, supply voltage, output or contact logic, sensing distance, cable termination and mounting dimensions against the installed component, its nameplate and the approved project document before ordering SH-GDC-3N.

حلول التغليف

تغليف بالكرتون
تغليف بالكرتون
تغليف بالصندوق الخشبي
تغليف بالصندوق الخشبي
تغليف بالباليت
تغليف بالباليت

المصنع والتصنيع

ورشة عمل ورشة عمل مستودع إنتاج
خط إنتاج آلي

لماذا تختارنا

إمداد موثوق بقطع غيار المصاعد مع خدمة مباشرة من المصنع، وجودة أصلية ودعم يعتمد عليه.

  • 01 تغطية كاملة بنسبة 100% لقطع الغيار
  • 02 أسعار مباشرة من المصنع
  • 03 ضمان الجودة
  • 04 خدمة شاملة من مكان واحد
  • 05 دعم موثوق بعد البيع

اللوجستيات العالمية والتوصيل

اللوجستيات العالمية

الشحن العالمي

الشحن البحري والجوي والبري

التغليف الدقيق للتصدير

خدمة لوجستية سريعة الاستجابة

المؤهلات والشهادات

شهادات

✓

تمت الإضافة إلى السلة بنجاح!