Electrical match
Confirm AC-15 or DC-13 duty, operating voltage, current, contact state, terminal layout and safety-controller requirements.
Roller-actuated limit switch with a spring-loaded mechanical linkage and covered screw terminals. Confirm the complete label, contact state, operating direction and mounting dimensions before replacement.
Four reviewed photographs show the same S3-B1370 structure from distinct views: complete roller-and-lever assembly, readable side label, covered contact terminals and opposite side profile. The original markings are retained for electrical and model verification.
| Item | Reviewed reference | Order check |
|---|---|---|
| Model | S3-B1370 | Confirm the complete physical label and wide-body version |
| Product type | Roller-actuated elevator limit switch | Confirm the intended limit or safety-circuit position |
| Standard marking | GB 14048.5 | Confirm project and local acceptance requirements |
| AC utilization rating shown | AC-15: 220 V / 2 A | Confirm the actual load category and circuit duty |
| DC utilization rating shown | DC-13: 110 V / 0.3 A | Confirm voltage, load and switching frequency |
| Insulation reference conflict | Physical label: Ui/Ith 500 V; backend record: insulation voltage 380 V | Obtain the supplied revision datasheet before final selection |
| Backend environmental reference | −5 to +40 °C; IP20 | Confirm against the actual unit and installation environment |
| Backend breaking-capacity reference | 1000 A | Do not apply until confirmed by exact-model documentation |
| Mechanical interface | Large roller, lever linkage, return spring and covered screw terminals | Compare wheel diameter, lever travel, mounting and terminal access |
The 500 V marking on the photographed unit does not match the 380 V backend entry. This conflict is intentionally retained for confirmation rather than resolved by assumption.
Confirm AC-15 or DC-13 duty, operating voltage, current, contact state, terminal layout and safety-controller requirements.
Check roller diameter, lever direction and travel, spring return, operating force and available clearance.
Compare body width, mounting holes, terminal-cover access, ambient temperature and required ingress protection.
No. Confirm the wide-body housing, roller and lever geometry, mounting points, contacts and full label.
The supplied photograph shows 500 V while the backend record says 380 V. Obtain an exact-revision datasheet or supplier confirmation before selection.
Provide the old unit's full label, installed position, contact state, circuit duty, body and mounting dimensions, and roller travel.
根据产品尺寸、重量及运输需求，精选各类防护性包装方案。
从精密加工到最终检验，每一道工序都致力于保障产品质量稳定、供应可靠。
工厂直供、品质保证、售后无忧，为您提供可靠的电梯零部件供应服务。
我们为全球范围内的电梯零部件订单提供可靠的运输支持，助您高效、安心地收到所需产品。
为遍布全球市场的客户提供灵活多样的配送方案。
可根据您的目的地、交货时间及订单需求，安排合适的运输方式。
产品经过安全包装，有效保护运输过程中的完好无损。
从订单确认到售后服务，我们的团队全程协助协调配送。
我们提供齐全的电梯零部件相关证书、检测报告及合规文件，让您采购更放心。
Choose a sales representative to discuss your project.
Loading contacts…