Does the main photo show both inclination options?
No. The exact-code photo shows a horizontal moving walk. The 12° configuration is evidenced by the dedicated manufacturer drawing and table.
ZH-ENG · Escalator and moving-walk systems
Automatic Moving Walk — 0° / 12° Configurations
Automatic moving-walk family with 800 mm and 1000 mm widths, 0° and 12° layouts, and project design-reference power breakpoints.
Product reference
available configurations
| Configuration | Pallet width | Inclination | Nominal speed | Maximum delivery capacity | A / B / C / D |
|---|---|---|---|---|---|
| 800 / 12° | 800 mm | 12° | 0.5 m/s | 6750 people/h | A 800 · B 1038 · C 1400 · D ≥1460 mm |
| 1000 / 12° | 1000 mm | 12° | 0.5 m/s | 9000 people/h | A 1000 · B 1238 · C 1600 · D ≥1660 mm |
| 800 / 0° | 800 mm | 0° | 0.5 m/s | 6750 people/h | A 800 · B 1038 · C 1400 · D ≥1460 mm |
| 1000 / 0° | 1000 mm | 0° | 0.5 m/s | 9000 people/h | A 1000 · B 1238 · C 1600 · D ≥1660 mm |
manufacturer power breakpoints
| Configuration | manufacturer ranges / breakpoints | Motor power |
|---|---|---|
| 800 / 12° | 1000–3800 / 3800–6000 / 6000–7600 / 7600–7800 mm | 1×7.5 / 1×11 / 1×15 / 2×11 kW |
| 1000 / 12° | 1000–3000 / 3000–4800 / 4800–6000 / 6000–6200 mm | 1×7.5 / 1×11 / 1×15 / 2×11 kW |
| 800 / 0° | manufacturer breakpoints: 80000 / 130000 / 150000 mm | 5.5 / 8 / 11 kW |
| 1000 / 0° | manufacturer breakpoints: 70000 / 110000 / 150000 mm | 5.5 / 8 / 11 kW |
Engineering boundary: These values are design reference only. Final construction, pit, support and drive details must follow the project technical drawing and contract.
not included or project-specific fields
| Field | Status |
|---|---|
| Supply voltage / frequency | Not stated on the accepted 0°/12° manufacturer page — confirm in the project technical agreement |
| Exact truss, support and pit interfaces | Use the project technical drawing; the catalogue page is design reference only |
| Materials, finish and optional safety devices | Not assigned as standard order content by this package |
| 10° / 11° configurations | not included; the product record is 0°/12° and the page directs 10°/11° projects to separate technical drawings |
| Brand / supplier attribution | The Emerson page is a confirmed matching information manufacturer, not proof that the product supplier or delivered brand is Emerson |
Technical drawings and parameter information
Each figure is cropped directly from the accepted 0°/12° manufacturer page. Open it to inspect the preserved native-pixel crop.
Selection questions
Are 800/0°, 1000/0°, 800/12° and 1000/12° separate model option SKUs?
No. They are manufacturer configuration columns grouped on this main link; no model option links are created.
How should the 0° first power breakpoint be interpreted?
The manufacturer prints the first values as 80000 and 70000 without a clearly visible inequality. This package preserves them as manufacturer breakpoints and does not invent a boundary operator.
Are the catalogue dimensions final construction values?
No. The manufacturer states that the data is for design reference and that detailed parameters should follow the project technical drawing.
Frequently Asked Questions
What configuration is visible for CPE-MW?
The exact product image shows a moving walkway with flat pallets and glazed balustrades. The image establishes the physical arrangement, not project ratings or electrical compatibility.
What project details should be confirmed before ordering?
Confirm dimensions, capacity or load class where applicable, mounting or civil interface, finish and the approved project drawing for the exact installation.
Which technical values still require documentation?
Confirm electrical supply, control interface, rated load or speed, safety configuration and compliance requirements from the nameplate and approved technical documents; these cannot be inferred from the image.
