ELEVATOR LOAD WEIGHING CONTROL SYSTEM
A load-weighing controller family with digital indication and selectable load sensors. Match the controller interface, sensor capacity and installation arrangement to the elevator application; the grouped views illustrate controller and sensor configurations.


| Item | Specification |
|---|---|
| System | DTZZIII elevator load-weighing control |
| Display | Three-digit indication for load percentage or floor information, according to configuration |
| Load signals | Relay outputs for overload, full-load, light-load and half-load thresholds, according to configuration |
| Optional interfaces | RS485 or CAN variants; optional analog-output configurations |
| Fault functions | Self-diagnosis and alarms for sensor disconnection or power interruption |
| Calibration options | Quick setup, empty/full-load learning, load correction and no-test-weight methods, according to configuration |
These are sensor-series choices, not one combined load rating or a list of included parts. Select the exact sensor capacity and mounting dimensions.
| Sensor model | Dimensions (mm) | Capacity options |
|---|---|---|
| D48 | Ø48 | 500 kg |
| W20C | 100 × 20 × 48 | 0.5 t / 1 t / 3 t |
| W24 | 150 × 24 × 48 | 0.5 t / 1 t / 3 t |
| W35 | 150 × 35 × 48 | 1 t / 3 t / 5 t |
| W110 | 110 × 74 × 48 | 1 t / 3 t / 5 t |
| W160B | 160 × 54 × 48 | 3 t / 5 t |
| W170 | 170 × 40 × 20 | 1 t |
Sensor values apply to the listed sensor selection, not to the controller enclosure. Overload limits are not normal working-load ratings.
| Item | Value |
|---|---|
| Sensitivity | 2 ±0.05 mV/V |
| Zero output | <±0.15% F.S. |
| Creep | <0.05% F.S. / 30 min |
| Repeatability | <0.05% F.S. |
| Temperature range | −20 to 65 °C |
| Insulation resistance | ≥5000 MΩ |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
The group views illustrate configurations. Specify the controller, sensor model and quantities required for the installation.
Interfaces depend on the selected configuration. Match the required RS485, CAN, relay or optional analog arrangement before ordering.
Compare the rated capacity, mounting dimensions and controller connection for each model in the selection table.
No. Use the selected sensor rated capacity for normal service; the overload limits do not increase its working-load rating.
Các lựa chọn đóng gói bảo vệ được lựa chọn phù hợp với kích thước, trọng lượng sản phẩm và yêu cầu vận chuyển.
Từ gia công chính xác đến kiểm tra cuối cùng, mọi quy trình đều hướng tới chất lượng đồng nhất và nguồn cung ổn định.
Nguồn cung phụ tùng thang máy đáng tin cậy với dịch vụ trực tiếp từ nhà máy, chất lượng chính hãng và hỗ trợ tận tâm.
Chúng tôi cung cấp dịch vụ vận chuyển đáng tin cậy cho các đơn hàng phụ tùng thang máy trên toàn thế giới, giúp bạn nhận được đúng sản phẩm một cách nhanh chóng và an tâm.
Các phương thức giao hàng linh hoạt dành cho khách hàng trên khắp thị trường thế giới.
Các hình thức vận chuyển có thể được bố trí phù hợp với điểm đến, lịch trình và yêu cầu của đơn hàng.
Sản phẩm được đóng gói chắc chắn nhằm bảo vệ trong quá trình vận chuyển.
Đội ngũ của chúng tôi hỗ trợ điều phối giao hàng từ khi xác nhận đơn hàng đến dịch vụ hậu mãi.
Chúng tôi cung cấp các chứng chỉ, báo cáo kiểm định và tài liệu tuân thủ liên quan đến phụ tùng thang máy, giúp bạn yên tâm hơn khi mua sắm.
Choose a sales representative to discuss your project.
Loading contacts…