Ürün Tanıtımı

PG-B3 Encoder Feedback Option

Name: PG Card
SKU: SH-01260005
Price: 114.05 USD
Availability: InStock

A PG-B3 feedback option for compatible Yaskawa drives. It accepts encoder pulse feedback for supported drive-control modes and provides monitor pulse outputs.

Product specifications

Parameter	Specification
Encoder input type	Complementary or open-collector output
Input phases	A, B and Z
Maximum input frequency	50 kHz
Input high level	8–12 V
Input low level	≤2 V
Encoder power supply	12 V ±5%, maximum 200 mA
Pulse-monitor output	Open collector, maximum 24 V / 30 mA
Operating temperature	−10 to +50 °C
Humidity	≤95% RH, non-condensing
Protection rating	IP00; install inside the drive enclosure

Connection terminals

Terminal	Function
IP	Encoder power (+12 V DC)
IG	0 V common
A1 / B1 / Z1	Encoder A / B / Z input
A2 / B2 / Z2	A / B / Z monitor pulse output
FE	Functional earth / cable shield

Frequently Asked Questions

What configuration is shown for PG B3?

Model PG B3 is shown as a compact green PG B3 interface board with terminal strip and plug connectors. Match the complete model, physical layout and documented interfaces to the installed component before ordering.

Which hardware details determine replacement compatibility?

Match the complete board or module code, revision, outline and mounting points, connector keying and terminal layout against the original hardware.

Which electrical and controller interfaces must match?

Confirm supply, I/O or communication interface, connector pinout, hardware/firmware revision and installed controller generation from the exact label and schematic.