SH-LOP-S101
Complete supplied LOP model range for elevator landing call applications. Each product retains its own main image; dedicated specifications are added only when matching source data is available.
This section uses the supplied technical reference. Variants that share this source are consolidated here once.
| Item | Reviewed reference | Order check |
|---|---|---|
| Display | Dot Matrix / LCD | Confirm against the approved project drawing |
| Size | 302×90×12 mm | Confirm against the approved project drawing |
| Material | Hairline / mirror stainless steel | Confirm against the approved project drawing |
Review every supplied LOP design below. Arrows, floor characters, button markings and illumination are representative and follow the approved project configuration.
Single-button or up/down call arrangements are selected according to the landing and elevator operating logic.
Dot-matrix, LED or LCD indication is model-dependent and must match the designated controller interface.
Panel shape, finish, button style and indication colour are confirmed for the selected model and project.
| Item | Project reference | Order check |
|---|---|---|
| Call logic | Single, up/down or project-specific operating logic is confirmed for each landing. | Confirm landing schedule |
| Dimensions | Use only the dimensions assigned to the exact LOP model. | Do not interchange model dimensions |
| Mounting | Flush, surface or model-specific installation follows the confirmed drawing. | Check wall opening and fixing |
| Electrical interface | Connector, wiring, power and communication protocol must match the controller. | Confirm controller interface |
Confirm controller, communication protocol, connector, power supply and wiring requirements.
Confirm faceplate dimensions, opening, back box, wall or car-panel construction and fixing method.
Confirm markings, finish, quantity, display content, button arrangement and any accessibility or special functions.
The exact product image shows a curved silver faceplate with a red direction/floor display and two round call buttons. Final markings and functions must follow the approved project schedule.
Confirm the required call or floor-button arrangement, display content, accessibility or special controls, faceplate finish and approved operating schedule.
Confirm faceplate dimensions, panel opening, mounting depth, connector, power and controller interface from the approved drawing. Appearance alone does not establish compatibility.
제품의 크기, 무게 및 배송 요구사항에 따라 선택된 보호 포장 옵션입니다.
정밀한 제조부터 최종 검사까지, 모든 공정이 일관된 품질과 신뢰할 수 있는 공급을 뒷받침합니다.
공장 직영 서비스, 정품 품질, 믿을 수 있는 지원으로 안정적인 엘리베이터 부품 공급을 제공합니다.
전 세계적으로 엘리베이터 부품 주문에 대한 신뢰할 수 있는 배송 서비스를 제공하여, 적합한 제품을 효율적이고 안심하며 받아보실 수 있도록 지원합니다.
글로벌 시장 전역의 고객을 위한 유연한 배송 옵션을 제공합니다.
배송 방법은 목적지, 일정 및 주문 요구사항에 따라 조정 가능합니다.
운송 중 제품을 안전하게 보호하기 위해 신중히 포장됩니다.
당사 팀이 주문 확인부터 사후 서비스까지 배송 일정을 철저히 관리합니다.
엘리베이터 부품에 대한 관련 인증서, 검사 보고서 및 규정 준수 문서를 제공하여 더욱 신뢰감 있게 소싱하실 수 있도록 지원합니다.
Choose a sales representative to discuss your project.
Loading contacts…