ZH-ENG · Elevator mechanical components
SH-JZD-S02 Elevator Damping Pad
Product Reference
SH-JZD-S02
Specifications
| Parameter | Confirmed value |
|---|---|
| Base plate | 210 × 160 mm |
| Upper plate | 145 × 110 mm |
| Mounting slots | 4 × 14 × 18 mm |
| Upper cross-section width | 125 mm |
| Lower elastomer width | 115 mm |
| Thread | M20-6H |
| Boss diameter | Ø48 mm |
| Overall height | 91 mm |
| Elastomer-section height | 55 mm |
Traction-machine damping-pad geometry. Confirm equipment load and dynamic performance separately; they are not specified on the manufacturer page.
Technical Drawings
The extracted figure boundaries retain every associated view, dimension line and label. Open the lossless original for dimension reading.
Selection Questions
How should the correct configuration be selected?
Match the exact model, the available specification table and every relevant dimension in the complete drawing; a visually similar component is not sufficient.
Are values not shown here implied by the product family?
No. Load capacity, material, certification and other unstated values require separate supplier confirmation.
Can the technical image be used for installation?
Use it for dimensional review only. Confirm the supplied revision and site interface before manufacture or installation.
