ZH-ENG · NICE elevator control cabinets
NICE-CX1 Home-Elevator Control Cabinet
Model-specific cabinet reference with operating range, enclosure data and standard-model current matrix.
Exact Product Reference
NICE-CX1
Cabinet Data
| Parameter | Value |
|---|---|
| Power range | 2.2–7.5 kW |
| Maximum speed | <1 m/s |
| Cabinet size | H854 × W530 × D240 mm |
| Communication | Serial |
| Power supply | 380 VAC three phase; 220 VAC three phase / single phase |
| Control voltage | DC 110 V |
| Elevator type | Home elevator |
| Mounting | Floor type / wall hanging |
| Colour | Dark grey |
| manufacturer-listed package | Wooden |
| Control system | NICE3000new integrated controller |
Power and Current Selection
| manufacturer matrix group | Power | Current |
|---|---|---|
| 220 V single phase, synchronous B | 2.2 kW | 5.2 A |
| 220 V single phase, synchronous B | 3.7 kW | 7.5 A |
| 220 V single phase, synchronous B | 7.5 kW | 10.3 A |
| 220 V three phase, synchronous B | 2.2 kW | 9.6 A |
| 220 V three phase, synchronous B | 3.7 kW | 14 A |
| 220 V three phase, synchronous B | 7.5 kW | 18 A |
| 380 V, synchronous B | 2.2 kW | 5.1 A |
| 380 V, synchronous B | 3.7 kW | 9 A |
| 380 V, synchronous B | 5.5 kW | 13 A |
| 380 V, synchronous B | 7.5 kW | 18 A |
The complete manufacturer matrix is retained below. Select by the full order code; the compact table does not replace final electrical selection.
Original Technical Tables
Selection Questions
Can current be selected from power alone?
No. Use the exact standard-model row, motor type and supply shown on the manufacturer matrix; similar power values can have different current ratings.
Does the cabinet picture confirm the supplied internal configuration?
No. Confirm the order code, motor type, power, supply and project I/O before production.
Are site wiring and project compliance included?
The manufacturer sheet describes the cabinet family only. Site wiring, protection coordination and project compliance require the final approved electrical documents.
