Product Overview
Three prepared photographs show the same Z-15GW22-B structure from the label side, terminal perspective and actuator-mechanism side. Original model and electrical markings are retained; the previous page logo was removed before applying the standard gallery branding. A similar terminal-angle image was excluded because it did not provide a clean independent view.
MODEL LABEL AND SHORT ROLLER LEVER
SCREW-TERMINAL PERSPECTIVE
ROLLER AND SNAP-ACTION MECHANISM
Specification Confirmation
| Item | Exact-model reference | Order check |
|---|
| Model | Z-15GW22-B | Confirm the complete physical marking |
| Actuator | Short stainless-steel hinge roller lever | Compare lever direction and cam position |
| Roller and lever geometry | Plastic roller Ø9.5 × 4 mm; lever radius 26.6 mm | Check available clearance and contact point |
| Contact arrangement | 1c / SPDT with silver-rivet contacts | Verify COM, NO and NC circuit requirements |
| Contact gap | 0.5 mm nominal | Confirm required switching characteristics |
| Terminals | M4 screw terminals | Check conductor size, lugs and terminal clearance |
| Rated carrying current | 15 A | Not a universal switching-load rating |
| AC resistive-load reference | 15 A at 125/250 VAC; 10 A at 500 VAC | Confirm voltage, load type and utilization category |
| DC resistive-load reference | 6 A at 30 VDC; 0.5 A at 125 VDC; 0.25 A at 250 VDC | Confirm actual DC load and inrush |
| Operating force | 1.57 N maximum | Check the installed cam and lever load |
| Operating position | 29.8–30.6 mm | Compare the installed actuation point |
| Ambient temperature | −25 to +80 °C, without icing | Confirm installation conditions |
| Ingress protection | IP00 | Provide enclosure protection where required |
A separate generic family/store reference mentions 16 A. The exact Z-15GW22-B manufacturer reference specifies 15 A rated carrying current, so the 16 A statement is not used as this product's final value.
Buyer Confirmation Checklist
Exact actuator
Confirm the short roller-lever version, 26.6 mm radius, roller size, operating direction and cam contact point.
Electrical load
State AC or DC voltage, resistive or inductive load, steady current, inrush and switching frequency.
Installation
Compare body and mounting dimensions, 29.8–30.6 mm operating position, terminal clearance and required enclosure protection.
Frequently Asked Questions
Should 15 A or 16 A be used?
Use the exact-model reference: 15 A rated carrying current. Final switching capacity still depends on voltage and load type.
Can Z-15GW22-B replace another Z-series switch directly?
Not from the family name alone. Confirm actuator geometry, operating position, contacts, terminals, mounting and circuit duty.
Does IP00 require additional protection?
Yes, where the installation can expose the switch to dust, moisture or accidental terminal contact, provide a suitable enclosure or guarded location.
Selection note: The exact model and physical unit take priority over generic family descriptions. Confirm the roller-lever geometry and actual circuit load before ordering.
