+86 021-57676786 News Center Careers
Home / FAQ / How do I select anti-vibration pads for an elevator traction machine?
← Back to FAQ list

How do I select anti-vibration pads for an elevator traction machine?

Ask Time: 2026-05-29
Answer
Provide the supported mass, load at each support, mounting area and vibration conditions. Pad stiffness and deflection must suit the machine and supporting structure. Selecting only by pad thickness or rubber hardness can give poor isolation or excessive movement.
Answer Time: 2026-05-29

Derived Questions

Why does elevator vibration remain after replacing the isolation pads?
The source may be machine alignment, bearings, ropes, structural connections or another transmission path. Pads cannot correct every mechanical defect. A vibration assessment should identify the source and load path before further changes are made to the isolation arrangement.
Ask Time: 2026-06-01 Answer Time: 2026-06-01
When should elevator rubber isolation pads be replaced?
Replacement should follow inspection findings and the equipment maintenance guidance. Cracking, permanent deformation, chemical damage or loss of the required support characteristics may justify replacement. Record loading and installation conditions so a new pad addresses the actual service environment.
Ask Time: 2026-06-03 Answer Time: 2026-06-03
What should an elevator anti-vibration pad quotation include?
Request the material specification, dimensions, load-deflection data and environmental limits for the proposed pads. Supply the support layout and load distribution. Clarify whether bolts, restraints or other mounting components are included so the complete support design can be reviewed.
Ask Time: 2026-06-02 Answer Time: 2026-06-02
Can I cut a large rubber sheet into elevator anti-vibration pads?
Only if the specified material and design permit that fabrication method. Cutting changes the loaded area and may affect performance or retention. Use a pad selection supported by load and deflection data instead of treating any rubber sheet as a machine isolator.
Ask Time: 2026-06-01 Answer Time: 2026-06-01
Will softer elevator machine pads always reduce vibration?
No. Softer pads can increase deflection and may create unsuitable movement or resonance under the actual operating conditions. An engineer should evaluate support loads and system behavior. The isolation design also needs to preserve machine alignment and structural restraint.
Ask Time: 2026-05-30 Answer Time: 2026-05-31