Integrated elevator drive and control in 5.5, 7.5 and 11 kW configurations for a nominal three-phase 380 V supply.
The EC160 combines motor-drive control, elevator logic and network communication in one unit. Select the controller by the motor rating, rated output current and the required control-system configuration.
EC160 controller appearance.
Available configurations
Model
EC160 code
Power (kW)
Rated output current (A)
SH-EC160/55
EC160-5R5-4
5.5
13
SH-EC160/75
EC160-7R5-4
7.5
18.5
SH-EC160/110
EC160-011-4
11
27
All three configurations are in the 400 V class. Their nominal product supply is three-phase 380 V.
Electrical characteristics
Parameter
Specification
Voltage class
Three-phase AC 400 V ±15%
Nominal supply for the listed products
Three-phase 380 V
Input frequency
47–63 Hz
Output voltage
0 to rated input voltage
Output frequency
0–400 Hz
Braking unit
Built in for the three listed ratings
Control interfaces
Interface
Specification
Low-voltage digital inputs
26 inputs, 9–30 V; selectable active-high or active-low operation
High-voltage detection inputs
5 inputs; 110 / 220 V detection
Relay outputs
6 normally-open outputs; 5 A / 250 V AC
Communication
2 CANbus ports and 2 Modbus ports
Encoder interfaces
SIN/COS, UVW and 12 V incremental encoder interfaces
Optional encoder expansion
ECN1313 or resolver PG card, selected to match the application
Encoder expansion cards and system accessories are selected separately to suit the motor, encoder and elevator control arrangement.
Braking-resistor selection
EC160 code
Resistance (Ω)
Resistor power (W)
EC160-5R5-4
55
1500
EC160-7R5-4
50
2000
EC160-011-4
40
4000
The resistor values above are matched to the listed controller ratings. Confirm the braking-duty requirement when selecting the external resistor.
Dimensions and mounting
Overall dimensions are W × H × D. A and B indicate fixing centres; C indicates the fixing-hole diameter. All dimensions below are in millimetres.
EC160 code
W
H
D
A
B
C Ø
Stud
EC160-5R5-4
223
347
168
150
334.5
7
M6
EC160-7R5-4
223
347
169
150
334.5
7
M6
EC160-011-4
223
347
169
150
334.5
7
M6
Frequently Asked Questions
What configuration is shown for EC160/55?
Model EC160/55 is shown as a controller board installed inside a grey metal enclosure. Match the complete model, physical layout and documented interfaces to the installed component before ordering.
Which hardware details determine replacement compatibility?
Match the complete board or module code, revision, outline and mounting points, connector keying and terminal layout against the original hardware.
Which electrical and controller interfaces must match?
Confirm supply, I/O or communication interface, connector pinout, hardware/firmware revision and installed controller generation from the exact label and schematic.
قدرة التصنيع
حلول التغليف
تغليف بالكرتون
تغليف بالصندوق الخشبي
تغليف بالباليت
المصنع والتصنيع
لماذا تختارنا
إمداد موثوق بقطع غيار المصاعد مع خدمة مباشرة من المصنع، وجودة أصلية ودعم يعتمد عليه.
