ZH-ENG | Diverting pulley
PL-IR400-04 Iron Pulley
Cast-iron elevator diverting pulley configured for 400 mm nominal diameter, 4 grooves and 8 mm rope diameter with 12 mm pitch.
Product Image and Specifications
The specification below applies only to this linked product configuration.
| Model | Diameter D (mm) | Grooves N | Rope diameter R (mm) | Pitch S (mm) | Aperture A (mm) | Hub diameter H (mm) | T1 (mm) | T2 (mm) | Width W (mm) | Bearing | Load capacity (kg) | Load ≤ (kg) | Speed (m/s) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PL-IR400-04 | 400 | 4 | 8 | 12 | 110 | 160 | 80 | 80 | 60 | 6212 | 1350 | 600 | ≤1.0 |
Technical Drawings
Lettered dimensions correspond to the exact configuration values above.
Technical Information
ConstructionCast-iron pulley body with machined rope-groove surfaces and a central bearing bore.
Documented bearing6212 bearing for this exact configuration.
Exact configurationØ400 mm · 4 grooves · Ø8 mm rope · 12 mm pitch.
Confirm rope diameter, groove count, pitch, load and installation dimensions against the required elevator arrangement before selection.
Frequently Asked Questions
What configuration is shown for PL-IR400-0412?
The exact product image shows a yellow multi-groove diverting sheave with a central hub. This confirms the visible construction only; it does not establish ratings or hidden interfaces.
What should be confirmed before ordering?
Confirm sheave diameter, groove count and profile, rope diameter, bore/bearing arrangement and the approved mounting drawing.
Which rope and bearing interfaces determine sheave fit?
Confirm sheave diameter, groove count and profile, rope diameter, bore or bearing arrangement and mounting dimensions from the approved reeving drawing.
