ZH-ENG | Traction machine
SH-TMYJ80
Geared traction machine configurations for 100–350 kg rated loads and 0.35–0.80 m/s car speeds.
Product Image and Specifications
| Configuration | Load (kg) | Speed (m/s) | Roping | Gear ratio | Sheave (mm) | Ropes | Pitch (mm) | Power (kW) | Poles | Frequency (Hz) | Motor speed (rpm) | Current (A) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SH-TMYJ80 — 100 kg / 0.35 m/s | 100 | 0.35 | 1:1 | 40:1 | Ø278 | 2 × Ø8 | 20 | 1.1 | 6 | 50 | 910 | 3.2 |
| SH-TMYJ80 — 250 kg / 0.35 m/s | 250 | 0.35 | 1:1 | 40:1 | Ø278 | 2 × Ø8 | 20 | 1.5 | 6 | 50 | 940 | 4.0 |
| SH-TMYJ80 — 300 kg / 0.35 m/s | 300 | 0.35 | 1:1 | 40:1 | Ø278 | 3 × Ø8 | 12 | 2.2 | 6 | 50 | 940 | 5.6 |
| SH-TMYJ80 — 350 kg / 0.80 m/s | 350 | 0.80 | 1:1 | 40:2 | Ø320 | 3 × Ø8 | 12 | 3.0 | 6 | 50 | 940 | 7.4 |
| SH-TMYJ80 — 300 kg / 0.40 m/s | 300 | 0.40 | 1:1 | 40:1 | Ø320 | 3 × Ø8 | 12 | 2.2 | 6 | 50 | 940 | 5.6 |
| SH-TMYJ80 — 350 kg / 0.35 m/s | 350 | 0.35 | 1:1 | 40:1 | Ø278 | 3 × Ø8 | 12 | 2.2 | 6 | 50 | 940 | 5.6 |
| SH-TMYJ80 — 350 kg / 0.40 m/s | 350 | 0.40 | 1:1 | 40:1 | Ø320 | 3 × Ø8 | 12 | 2.2 | 6 | 50 | 940 | 5.6 |
| SH-TMYJ80 — 250 kg / 0.40 m/s | 250 | 0.40 | 1:1 | 40:1 | Ø320 | 2 × Ø8 | 20 | 1.5 | 6 | 50 | 940 | 4.0 |
| SH-TMYJ80 — 100 kg / 0.40 m/s | 100 | 0.40 | 1:1 | 40:1 | Ø320 | 2 × Ø8 | 20 | 1.1 | 6 | 50 | 910 | 3.2 |
| SH-TMYJ80 — 200 kg / 0.35 m/s | 200 | 0.35 | 1:1 | 40:1 | Ø278 | 2 × Ø8 | 20 | 1.1 | 6 | 50 | 910 | 3.2 |
| SH-TMYJ80 — 200 kg / 0.40 m/s | 200 | 0.40 | 1:1 | 40:1 | Ø320 | 2 × Ø8 | 20 | 1.1 | 6 | 50 | 910 | 3.2 |
Technical Drawings and Dimensions
Dimension values are shown for each available configuration where confirmed.
| Configuration | Sheave | Overall length | Overall width | Overall height | Mounting pattern | Mounting holes | Base width |
|---|---|---|---|---|---|---|---|
| SH-TMYJ80 — 100 kg / 0.35 m/s | Ø278 | ≈690 | 370 | 466 | 200 × 180 | 4 × Ø17 | 250 |
| SH-TMYJ80 — 250 kg / 0.35 m/s | Ø278 | ≈690 | 370 | 466 | 200 × 180 | 4 × Ø17 | 250 |
| SH-TMYJ80 — 300 kg / 0.35 m/s | Ø278 | ≈690 | 370 | 466 | 200 × 180 | 4 × Ø17 | 250 |
| SH-TMYJ80 — 350 kg / 0.80 m/s | Ø320 | ≈690 | 370 | 488 | 200 × 180 | 4 × Ø17 | 250 |
| SH-TMYJ80 — 300 kg / 0.40 m/s | Ø320 | ≈690 | 370 | 488 | 200 × 180 | 4 × Ø17 | 250 |
| SH-TMYJ80 — 350 kg / 0.35 m/s | Ø278 | ≈690 | 370 | 466 | 200 × 180 | 4 × Ø17 | 250 |
| SH-TMYJ80 — 350 kg / 0.40 m/s | Ø320 | ≈690 | 370 | 488 | 200 × 180 | 4 × Ø17 | 250 |
| SH-TMYJ80 — 250 kg / 0.40 m/s | Ø320 | ≈690 | 370 | 488 | 200 × 180 | 4 × Ø17 | 250 |
| SH-TMYJ80 — 100 kg / 0.40 m/s | Ø320 | ≈690 | 370 | 488 | 200 × 180 | 4 × Ø17 | 250 |
| SH-TMYJ80 — 200 kg / 0.35 m/s | Ø278 | ≈690 | 370 | 466 | 200 × 180 | 4 × Ø17 | 250 |
| SH-TMYJ80 — 200 kg / 0.40 m/s | Ø320 | ≈690 | 370 | 488 | 200 × 180 | 4 × Ø17 | 250 |
Series Technical Information
Operating range1:1 roping; 100–350 kg rated load; 0.35–0.80 m/s.
Drive and brakeAC1/VVVF drive; DC 110 V, 0.9 A brake.
Mechanical limitsMaximum traction-sheave shaft load 1600 kg; machine weight 150 kg.
Traction sheave position: left.
Configuration and Installation Information
For the YJ80 configurations listed above, use the complete mounting drawing below when checking installation clearances.
Selection Questions
Which rated-load and speed configurations are covered?
The listed YJ80 configurations cover 100–350 kg with 1:1 roping. Match the rated load, speed and traction-sheave diameter to the selected row.
What brake supply is shown?
The YJ80 series information specifies a DC 110 V, 0.9 A brake.
