Resolve the suffix
Request a complete label photograph and confirm M20 × 1.5 versus M16 × 1.5 before selecting a gland, drawing or replacement.
Compact position switch with plunger actuator, screw terminals and one normally-open plus one normally-closed contact in the reviewed manufacturer versions. Confirm the complete suffix and cable-entry thread before ordering.
Four retained photographs show the same TS 236-11Z-M20 structure from different angles, including the plunger, housing, M20 label, cable-entry end and side profile. The inventory record omits the cable-entry suffix, so these photographs are presented as an M20 reference and not as proof of the exact stocked revision.
| Item | Reviewed reference | Order check |
|---|---|---|
| Inventory model | SH-TS236-11Z | Confirm manufacturer and complete suffix |
| Photographed version | Schmersal TS 236-11Z-M20 | Do not assume M20 until the supplied label is checked |
| Alternative official version | TS 236-11Z-M16, article 151172700 | M16 dimensions and entry must not be mixed with M20 |
| Actuator | Plunger; head repositionable in four 90° steps in the reviewed family information | Confirm approach direction and head orientation |
| Contact arrangement | 1 NO + 1 NC; slow action in the M16 official reference | Verify the actual terminal diagram and contact continuity |
| Connection | Screw terminals; 0.75–2.5 mm² reference range | Confirm conductor preparation and terminal access |
| Thermal current | 10 A reference | Not a universal switching-current rating |
| Operational current reference | AC-15: 4 A at 230 VAC; DC-13: 1 A at 24 VDC | Values are from the M16 official reference; confirm the supplied version |
| M20 legacy housing reference | 30 × 58.5 × 30 mm; M20 × 1.5 entry | Confirm against the current physical unit before installation |
| M16 official overall reference | 30 × 30 × 73.5 mm; M16 × 1.5 entry | Alternative version only; do not apply to an M20 unit |
| Protection reference | IP65 / IP67 in the reviewed M16 page | Confirm the exact version, gland and installed sealing |
The 10 A value is identified as thermal test current in the manufacturer data. Final switching suitability depends on utilization category, voltage, load, inrush and the exact supplied suffix.
Request a complete label photograph and confirm M20 × 1.5 versus M16 × 1.5 before selecting a gland, drawing or replacement.
Check plunger height and travel, approach direction, head orientation, housing dimensions, mounting points and entry clearance.
Verify 1 NO + 1 NC operation, terminal numbering, AC-15 or DC-13 duty, load current, inrush and protective device.
Not automatically. Their cable-entry thread differs, and the matching dimensions, gland and documentation must follow the supplied suffix.
No. The manufacturer reference identifies 10 A as thermal current. Operational switching ratings depend on utilization category and voltage.
Confirm manufacturer, full suffix, actuator geometry, housing and mounting dimensions, entry thread, terminal diagram, contact logic and real circuit duty.
根据产品尺寸、重量及运输需求，精选各类防护性包装方案。
从精密加工到最终检验，每一道工序都致力于保障产品质量稳定、供应可靠。
工厂直供、品质保证、售后无忧，为您提供可靠的电梯零部件供应服务。
我们为全球范围内的电梯零部件订单提供可靠的运输支持，助您高效、安心地收到所需产品。
为遍布全球市场的客户提供灵活多样的配送方案。
可根据您的目的地、交货时间及订单需求，安排合适的运输方式。
产品经过安全包装，有效保护运输过程中的完好无损。
从订单确认到售后服务，我们的团队全程协助协调配送。
我们提供齐全的电梯零部件相关证书、检测报告及合规文件，让您采购更放心。
Choose a sales representative to discuss your project.
Loading contacts…