Ürün Tanıtımı

EC160 Integrated Elevator Controller

Name: Elevator Inverter
SKU: SH-01300003
Price: 500.83 USD
Availability: InStock

Integrated elevator drive and control in 5.5, 7.5 and 11 kW configurations for a nominal three-phase 380 V supply.

The EC160 combines motor-drive control, elevator logic and network communication in one unit. Select the controller by the motor rating, rated output current and the required control-system configuration.

EC160 Integrated Elevator Controller — EC160 controller appearance.

Available configurations

Model	EC160 code	Power (kW)	Rated output current (A)
SH-EC160/55	EC160-5R5-4	5.5	13
SH-EC160/75	EC160-7R5-4	7.5	18.5
SH-EC160/110	EC160-011-4	11	27

All three configurations are in the 400 V class. Their nominal product supply is three-phase 380 V.

Electrical characteristics

Parameter	Specification
Voltage class	Three-phase AC 400 V ±15%
Nominal supply for the listed products	Three-phase 380 V
Input frequency	47–63 Hz
Output voltage	0 to rated input voltage
Output frequency	0–400 Hz
Braking unit	Built in for the three listed ratings

Control interfaces

Interface	Specification
Low-voltage digital inputs	26 inputs, 9–30 V; selectable active-high or active-low operation
High-voltage detection inputs	5 inputs; 110 / 220 V detection
Relay outputs	6 normally-open outputs; 5 A / 250 V AC
Communication	2 CANbus ports and 2 Modbus ports
Encoder interfaces	SIN/COS, UVW and 12 V incremental encoder interfaces
Optional encoder expansion	ECN1313 or resolver PG card, selected to match the application

Encoder expansion cards and system accessories are selected separately to suit the motor, encoder and elevator control arrangement.

Braking-resistor selection

EC160 code	Resistance (Ω)	Resistor power (W)
EC160-5R5-4	55	1500
EC160-7R5-4	50	2000
EC160-011-4	40	4000

The resistor values above are matched to the listed controller ratings. Confirm the braking-duty requirement when selecting the external resistor.

Dimensions and mounting

EC160 front and side installation drawing with W H D A B and C dimension labels — Overall dimensions are W × H × D. A and B indicate fixing centres; C indicates the fixing-hole diameter. All dimensions below are in millimetres.

EC160 code	W	H	D	A	B	C Ø	Stud
EC160-5R5-4	223	347	168	150	334.5	7	M6
EC160-7R5-4	223	347	169	150	334.5	7	M6
EC160-011-4	223	347	169	150	334.5	7	M6

Frequently Asked Questions

What configuration is shown for EC160/55?

Model EC160/55 is shown as a controller board installed inside a grey metal enclosure. Match the complete model, physical layout and documented interfaces to the installed component before ordering.

Which hardware details determine replacement compatibility?

Match the complete board or module code, revision, outline and mounting points, connector keying and terminal layout against the original hardware.

Which electrical and controller interfaces must match?

Confirm supply, I/O or communication interface, connector pinout, hardware/firmware revision and installed controller generation from the exact label and schematic.