Product appearance and model reference for elevator display and control applications.
CURRENT PRODUCT
SM.GC/C
Dedicated information for product link SH-01190002. Confirm this model and specification against the installed unit before ordering.
SM.GC/C · Group Control Board
Product code
SH-01190002
Model
SM.GC/C
Specification
Group Control Board
Main product and corresponding child products
Each card below uses the independently matched product image for that exact link. The highlighted card is the current product.
SM.GC/C
Main product · Group Control Board
Display Series Display & Control Products
Dot-matrix Display Board
SH-HCB-H
Dot-matrix Display Board
SH-HCB-D5
LCD Display Board
SH-HCB-L
Display Board
SH-HCB-LG-BO
4.3-inch Display Board
SH-HCB-T4.3
4.3-inch Display Board
SH-HCB-TO4.3
7-inch Display Board
SH-CCB-L7
6.4-inch Display Board
SH-CCB-L6.4
7-inch Display Board
SH-CCB-T7
8-inch Display Board
SH-CCB-T8
10.4-inch Display Board
SH-CCB-T10.4
STEP Display & Control Products
Hand-held Operator
SM.08/G
Group Control Board
SM.GC/C
Car Control Board
SM.02/G
Car-top Control Board
SM.02/H
Car Call Board
SM-03-D
Car Call Board
SM-03-E
Extension Board
SM.091CA.11
Dotmatrix
SM.04VS/12
Dotmatrix
SM.04VS/09
Dotmatrix
SM.04HS/L
Segment
SM.04V16/B
Segment
SM.04H16/A
Display Board 4.3 in
SM.04VL 16/X
Display Board 5.7 in
SM.04HL 16/H
Display Board 4.3 in
SM.04TL/W
Display Board 7 in
SM.04TL/T
Display Board 10.4 in
SM.04TL/H(Pictures)
Display Board 12.1 in
SM.04TL/K(Video)
Monarch Display & Control Products
Car Top Board
MCTC-CTB-A
Dotmatrix
MCTC-HCB-H
Group Control Board
MCTC-GCB-A
Dotmatrix
MCTC-HCB-F
Command Board
MCTC-CCB-A
Residential Area Monitoring Interface Board
MCTC-BMB-A
Ultrathin Board
MCTC-HCB-R1
No Display Call
MCTC-HCB-B
Dotmatrix
MCTC-HCB-Q1
Large Dotmatrix
MCTC-HCB-G1
Car Top Board
MCTC-CTB-B
LCD Display
MCTC-HCB-D1
Display Board 4.3 in
MCTC-HCB-T1
Display Board 4.3 in
MCTC-HCB-U1
Display Board 6.4 in
MCTC-HCB-V1
Display Board 5.7 in
MCTC-HCB-Z1
Display Board 7 in
MCTC-HCB-T2/T5
Display Board 9.7 in
MCTC-HCB-T3/T6
Product Functions
Provides elevator floor, direction and operating-status indication according to the selected dot-matrix, segment, LCD or TFT configuration. Available functions depend on the exact model and system interface.
Configuration
Confirm the complete model and suffix, display technology, screen orientation, communication or signal interface, supply voltage, connector arrangement and language/layout before quotation.
Installation
Use the drawing for the exact selected model. Visible size and installation size are different values. Confirm panel cut-out, fixing points, depth, cable clearance and connector direction before fabrication.
Ordering Confirmation
Provide the exact model, controller or system brand, required screen size and orientation, display content, interface/protocol, supply voltage, mounting dimensions, quantity and destination requirements. Final compatibility must be confirmed against the supplied unit and project drawings.
Frequently Asked Questions
What is SM.GC/C used for?
SM.GC/C is a STEP elevator group-control board used to coordinate multiple lifts through centralized group-control logic.
How many elevators can the group-control system support?
STEP describes the SM-GC group-control system as supporting up to eight elevators, with CAN bus communication between the group controller and individual lift controllers.
What must be matched before ordering the board?
Confirm the exact SM.GC/C hardware revision, controller family, connector arrangement, CAN network and required group-control functions against the existing system.
