YASKAWA Board
The ADL2000-D6 V1.1 is an elevator electronic board with low-voltage DC control power and plug-in wiring connections for integration into an elevator assembly.

| Parameter | Specification |
|---|---|
| Board model / revision | ADL2000-D6 V1.1 |
| Nominal control supply | 24 V DC |
| Permitted supply range | 18–30 V DC |
| Idle current | Approximately 80 mA |
| Dynamic current | ≤250 mA |
Model ADL2000-D6 is shown as a green ADL2000-D6 interface board with relays, terminals and attached wire leads. Match the complete model, physical layout and documented interfaces to the installed component before ordering.
Match the complete board or module code, revision, outline and mounting points, connector keying and terminal layout against the original hardware.
Confirm supply, I/O or communication interface, connector pinout, hardware/firmware revision and installed controller generation from the exact label and schematic.
ตัวเลือกบรรจุภัณฑ์ป้องกันที่ถูกคัดสรรตามขนาด น้ำหนักของผลิตภัณฑ์ และข้อกำหนดการขนส่ง
ตั้งแต่กระบวนการผลิตที่แม่นยำไปจนถึงการตรวจสอบขั้นสุดท้าย ทุกขั้นตอนมุ่งเน้นเพื่อคุณภาพที่สม่ำเสมอและการจัดส่งที่เชื่อถือได้
การจัดหาอะไหล่ลิฟต์ที่เชื่อถือได้พร้อมบริการจากโรงงานโดยตรง คุณภาพแท้จริง และการสนับสนุนที่ไว้วางใจได้
เรามอบการสนับสนุนด้านการจัดส่งที่เชื่อถือได้สำหรับคำสั่งซื้ออะไหล่ลิฟต์ทั่วโลก ช่วยให้คุณได้รับสินค้าที่ถูกต้องอย่างมีประสิทธิภาพและมั่นใจ
ตัวเลือกการจัดส่งที่ยืดหยุ่นสำหรับลูกค้าในตลาดทั่วโลก
สามารถจัดเตรียมวิธีการขนส่งได้ตามปลายทาง ตารางเวลา และข้อกำหนดของคำสั่งซื้อ
สินค้าถูกบรรจุอย่างปลอดภัยเพื่อป้องกันระหว่างการขนส่ง
ทีมงานของเราช่วยประสานงานการจัดส่งตั้งแต่การยืนยันคำสั่งซื้อไปจนถึงบริการหลังการขาย
เรามีใบรับรอง รายงานการตรวจสอบ และเอกสารแสดงความสอดคล้องที่เกี่ยวข้องกับอะไหล่ลิฟต์ เพื่อช่วยให้คุณจัดหาสินค้าได้อย่างมั่นใจยิ่งขึ้น
Choose a sales representative to discuss your project.
Loading contacts…