Reviewed Product Views
Five distinct submitted compositions show the hub arrangement, flexible element and available size family. Specification screenshots are not reused as product images.
UPRIGHT AND SIDE ORIENTATION
HUB AND FLEXIBLE ELEMENT ORIENTATIONS
MIXED SIZE FAMILY REFERENCE
RELATIVE SIZE LINEUP
COUPLING FAMILY FRONT VIEW
Specification Confirmation
| Parameter | Reviewed reference |
|---|
| Backend model | SH-CFE |
| Product type | Flexible encoder coupling |
| Visible structure | Two metallic hubs joined by a blue figure-eight flexible element |
| Hub retention | Radial set screws are visible in the submitted product views |
| Intended reference | Encoder-to-shaft connection in elevator feedback assemblies |
| Available appearance | Submitted images show several body and hub sizes; the supplied size must be selected by measurement |
| Bore sizes | Not confirmed for SH-CFE; specify both shaft diameters |
| Overall length and outside diameter | Not confirmed for SH-CFE; measure the installation space and removed coupling |
| Torque, speed and allowable misalignment | Not assigned because the available numeric table is not identified as SH-CFE |
| Material | The reference page describes a TPU flexible element, but confirm the supplied SH-CFE material before order |
Selection Checklist
Measure both shafts
- Encoder-side shaft diameter
- Motor or mechanism-side shaft diameter
- Usable engagement length and key features
Check the envelope
- Overall length and outside diameter
- Axial and radial clearance
- Set-screw access after installation
Confirm operating duty
- Maximum speed and working torque
- Expected angular, radial and axial misalignment
- Temperature, oil exposure and maintenance access
Configuration note: The submitted numeric series tables are not identified as SH-CFE, so their bore, length, torque and speed values are intentionally excluded. Confirm the physical unit before supply.
FAQ
What measurements are required before ordering SH-CFE?
Provide both shaft diameters, overall coupling length, outside diameter, set-screw positions and the available installation clearance.
Can a visually similar coupling be selected by appearance alone?
No. Similar figure-eight couplings can differ in bore, length, hub size, torque, speed and allowable misalignment.
What should be checked during installation?
Confirm both hubs seat on the intended shaft sections, tighten the set screws to the approved value, avoid preloading the flexible element and rotate the assembly by hand before commissioning.
Are the dimensions in the submitted series screenshots confirmed for SH-CFE?
No. They are not displayed or adopted because the screenshots do not identify the backend SH-CFE model.
