Two inclinations
The manufacturer construction page provides separate design references for 30° and 35° escalators.
ZH-ENG · Passenger circulation
30° / 35° Escalator manufacturer Series
Escalator design references for 600, 800 and 1000 mm step widths at 0.5 m/s, grouped on the confirmed main-product link.
Application and Configuration
Three step widths
600, 800 and 1000 mm step-width selections are listed at 0.5 m/s.
Escalator-only scope
Only inclined step-type passenger equipment is included in this supplement.
Product and Technical Drawings
The selected pages, images and technical data apply only to escalators.
Specifications and Selection Data
Escalator selection matrix
| Inclination | Step width | Travel height H | Speed | Capacity | Motor power by H | A / B / C / D |
|---|---|---|---|---|---|---|
| 30° | 600 mm | 3000–6000 mm | 0.5 m/s | 4500 people/h | 8 kW | 600 / 838 / 1200 / ≥1260 mm |
| 30° | 800 mm | 3000–6000 mm | 0.5 m/s | 6750 people/h | 8 kW to H≤5000; 11 kW above 5000 | 800 / 1038 / 1400 / ≥1460 mm |
| 30° | 1000 mm | 3000–7500 mm | 0.5 m/s | 9000 people/h | 8 kW to H≤4500; 11 kW to 6000; 15 kW above 6000 | 1000 / 1238 / 1600 / ≥1660 mm |
| 35° | 600 mm | 3000–6000 mm | 0.5 m/s | 4500 people/h | 8 kW | 600 / 838 / 1200 / ≥1260 mm |
| 35° | 800 mm | 3000–6000 mm | 0.5 m/s | 6750 people/h | 8 kW to H≤5500; 11 kW above 5500 | 800 / 1038 / 1400 / ≥1460 mm |
| 35° | 1000 mm | 3000–6000 mm | 0.5 m/s | 9000 people/h | 8 kW to H≤4500; 11 kW above 4500 | 1000 / 1238 / 1600 / ≥1660 mm |
manufacturer data is for design reference; use the approved project drawing for final dimensions.
Select inclination, step width and travel height together. Motor power changes at the height thresholds stated in the manufacturer table.
Project confirmation
- Inclination and vertical rise
- Step width and required capacity
- Support, pit and interface dimensions
- Flat-step arrangement and truss clearances
- Indoor/outdoor environment, finishes, controls and site compliance
Frequently Asked Questions
Does this page include other conveyor product families?
No. The content, imagery and data are restricted to escalators.
Which step widths are supported by the manufacturer?
The manufacturer lists 600, 800 and 1000 mm selections.
Can the manufacturer drawing be used as the final civil drawing?
No. It is a design reference; the approved project drawing controls.
