SH-TMYJ135
Geared traction machine configurations for 400–630 kg rated loads at 1.0 m/s.
Product Image and Specifications
| Configuration | Load (kg) | Speed (m/s) | Roping | Gear ratio | Sheave / ropes / pitch | Power (kW) | Poles | Frequency (Hz) | Motor speed (rpm) | Current (A) |
|---|---|---|---|---|---|---|---|---|---|---|
| SH-TMYJ135 — 400 kg / 1.0 m/s | 400 | 1.0 | 1:1 | 37:1 | Ø480 / 4 × Ø10 / 16 mm | 4.0 | 4 | 51 | 1472 | 8.6 |
| SH-TMYJ135 — 500 kg / 1.0 m/s | 500 | 1.0 | 1:1 | 37:1 | Ø480 / 4 × Ø10 / 16 mm | 5.5 | 4 | 51 | 1472 | 11.3 |
| SH-TMYJ135 — 630 kg / 1.0 m/s | 630 | 1.0 | 1:1 | 37:1 | Ø480 / 4 × Ø10 / 16 mm | 6.4 | 4 | 51 | 1472 | 13.0 |
Technical Drawings and Dimensions
Dimension values are shown for each available configuration where confirmed.
| Configuration | Overall length | Overall height | Overall width | Base width | Mounting pattern | Mounting holes |
|---|---|---|---|---|---|---|
| SH-TMYJ135 — 400 kg / 1.0 m/s | ≈1070 | 670 | 428 | 260 | 240 × 110 | 4 × Ø18 |
| SH-TMYJ135 — 500 kg / 1.0 m/s | ≈1070 | 670 | 428 | 260 | 240 × 110 | 4 × Ø18 |
| SH-TMYJ135 — 630 kg / 1.0 m/s | ≈1070 | 670 | 428 | 260 | 240 × 110 | 4 × Ø18 |
Series Technical Information
Configuration and Installation Information
This link includes YJ135 and YJ150K configurations. Their product appearances and installation drawings are shown separately; do not select one model by the photograph of the other.
YJ135
| Model | Configuration |
|---|---|
| YJ135 | 400KG 1.0M/S 1:1 4KW |
| YJ135 | 500KG 1.0M/S 1:1 5.5KW |
| YJ135 | 630KG 1.0M/S 1:1 6.4KW |
YJ135: DC 110 V, 1.1 A brake; machine weight 210 kg; maximum traction-sheave shaft load 5200 kg.
YJ150K
| Model | Configuration |
|---|---|
| YJ150K | 500KG 1.0M/S 1:1 5.5KW |
| YJ150K | 630KG 1.0M/S 1:1 6.4KW |
YJ150K: DC 110 V, 1.1 A brake; machine weight 360 kg; maximum traction-sheave shaft load 4330 kg.
Frequently Asked Questions
What is TMYJ135-40?
TMYJ135-40 is identified by the verified source as a geared elevator traction-machine family.
What should be matched before ordering?
Specify the full model suffix and compare the original nameplate, connector or mounting arrangement, electrical ratings and approved equipment drawing.
Can a visually similar part be used automatically?
No. Similar parts can have different interfaces, ratings or software/configuration requirements; confirm the exact equipment application before replacement.
