ZH-ENG | Diverting pulley
PL-IR200-03 Iron Pulley
Cast-iron elevator diverting pulley configured for 200 mm nominal diameter, 3 grooves and 6.5 mm rope diameter with 10 mm pitch.
Product Image and Specifications
The specification below applies only to this linked product configuration.
| Model | Diameter D (mm) | Grooves N | Rope diameter R (mm) | Pitch S (mm) | Aperture A (mm) | Hub diameter H (mm) | T1 (mm) | T2 (mm) | Width W (mm) | Bearing | Load capacity (kg) | Load ≤ (kg) | Speed (m/s) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PL-IR200-03 | 200 | 3 | 6.5 | 10 | 90 | 130 | 60 | 80 | 60 | 6210 | 675 | 300 | ≤1.0 |
Technical Drawings
Lettered dimensions correspond to the exact configuration values above.
Technical Information
ConstructionCast-iron pulley body with machined rope-groove surfaces and a central bearing bore.
Documented bearing6210 bearing for this exact configuration.
Exact configurationØ200 mm · 3 grooves · Ø6.5 mm rope · 10 mm pitch.
Confirm rope diameter, groove count, pitch, load and installation dimensions against the required elevator arrangement before selection.
Frequently Asked Questions
What configuration is shown for PL-IR200-0310?
The exact product image shows a yellow multi-groove diverting sheave with a central hub. Match the complete model, physical layout and documented interfaces to the installed component before ordering.
Which mechanical interfaces determine sheave fit?
Check outside diameter, groove count/profile, bore or bearing dimensions and approved reeving drawing.
Which rope and bearing data require confirmation?
Confirm rope diameter, groove profile, bearing/bore specification and permitted load from the approved documents.
