Does this configuration require a separate control box?
No. The supplied GM9 sources and exact-code image identify the 09156J configuration as operating without a separate control box.
ZH-ENG · Elevator door sensing
SH-GM9-Z/09156J Elevator Light Curtain
Nine-millimetre, 156-beam GM9 elevator light curtain designed to operate without a separate control box.
Product reference
Model and model option configuration map
| Model | Role | Beam configuration |
|---|---|---|
| SH-GM9-Z/09156J | MAIN | 156 |
available and isolated fields
| Parameter | Value / status |
|---|---|
| Profile thickness | 9 mm |
| Scanning beams | 156 |
| Control box | Not required for this configuration |
| Detection range | 0–4000 mm |
| Upper beam length | 1780 ± 20 mm |
| Lower beam callout | 25 ± 5 mm |
| Photoelectric-unit spacing | 110 mm |
| Scan speed | 45 ms; 22 scans/s, as listed |
| Installation tolerance | Vertical ≤±20 mm; horizontal ≤±10 mm; angle ≤±7° |
| Response time | ≤65 ms |
| Listed ambient-light limit | ≤100,000 lux |
| Supply | 10–30 VDC |
| manufacturer-listed output modes | Relay; NPN (NO/NC); PNP (NO/NC) — confirm selected wiring |
| Operating temperature | −20 to +65 °C |
| Protection level | IP54 |
Technical information
The supplied manufacturer page contains no dimensional drawing. No technical drawing has been invented or borrowed from another model.
Selection questions
Can the 192, 230 or 320-beam luxury data be used here?
No. This main record is the 9 mm, 156-beam configuration only.
Which output mode should be ordered?
The manufacturer lists relay, NPN and PNP choices. Confirm the controller input and selected wiring before ordering.
Frequently Asked Questions
What configuration is shown for GM9-Z/09156J?
The exact product image shows a GM9-Z/09156J light-curtain profile with attached cable. This confirms visible construction only; ratings and hidden functions require source documentation.
Which mechanical details determine light-curtain fit?
Check profile length and section, transmitter/receiver arrangement, mounting brackets, cable exit and connector against the existing doorway.
Which light-curtain interfaces must match?
Confirm supply, beam coverage, transmitter/receiver assignment, output or communication type and controller compatibility from the exact label and documentation; do not infer beam count from the image.
