MODEL-SPECIFIC INFORMATION
SH-LOP-S121 Series Information
This section uses the supplied technical reference. Variants that share this source are consolidated here once.
| Item | Reviewed reference | Order check |
|---|
| Display | Dot Matrix / LCD | Confirm against the approved project drawing |
| Size | 310×100×20 mm | Confirm against the approved project drawing |
| Material | Hairline / mirror stainless steel | Confirm against the approved project drawing |
Model confirmation: Confirm finish, display, button, interface, mounting and project options before order.
Available LOP Models
Review every supplied LOP design below. Arrows, floor characters, button markings and illumination are representative and follow the approved project configuration.
SH-LOP-S101
SH-LOP-S102
SH-LOP-S103
SH-LOP-S104
SH-LOP-S105
SH-LOP-S106
SH-LOP-S107
SH-LOP-S108
SH-LOP-S109
SH-LOP-S111
SH-LOP-S115
SH-LOP-S117
SH-LOP-S119
SH-LOP-S120
SH-LOP-S122
SH-LOP-S123
SH-LOP-S124
SH-LOP-S125
SH-LOP-S126
SH-LOP-S127
SH-LOP-S128
SH-LOP-S129
SH-LOP-S130
SH-LOP-S131
SH-LOP-S132
SH-LOP-S133
SH-LOP-S134
SH-LOP-S135
SH-LOP-S136
SH-LOP-S137
SH-LOP-010
SH-LOP-011
SH-LOP-012
SH-LOP-020
SH-LOP-040
SH-LOP-050
SH-LOP-060
SH-LOP-070
SH-LOP-080
SH-LOP-090
SH-LOP-311
SH-LOP-309
SH-LOP-640
SH-LOP-691
SH-LOP-692
SH-LOP-698
SH-LOP-701
SH-LOP-702
SH-LOP-703
SH-LOP-704
SH-LOP-705
SH-LOP-707
SH-LOP-708
SH-LOP-709
SH-LOP-712
SH-LOP-C160
SH-LOP-C161
SH-LOP-EPAD-050
SH-LOP-HCB
SH-LOP-HCB-D5
SH-LOP-HCB-D5-3.2
SH-LOP-S112
SH-LOP-S138
SH-LOP-S139
SH-LOP-S140
SH-LOP-SF110-F
SH-LOP-SF110-G
Product Functions
01
Call buttons
Single-button or up/down call arrangements are selected according to the landing and elevator operating logic.
02
Display options
Dot-matrix, LED or LCD indication is model-dependent and must match the designated controller interface.
03
Faceplate choices
Panel shape, finish, button style and indication colour are confirmed for the selected model and project.
Configuration and Installation
| Item | Project reference | Order check |
|---|
| Call logic | Single, up/down or project-specific operating logic is confirmed for each landing. | Confirm landing schedule |
| Dimensions | Use only the dimensions assigned to the exact LOP model. | Do not interchange model dimensions |
| Mounting | Flush, surface or model-specific installation follows the confirmed drawing. | Check wall opening and fixing |
| Electrical interface | Connector, wiring, power and communication protocol must match the controller. | Confirm controller interface |
Buyer Confirmation Checklist
01
Electrical interface
Confirm controller, communication protocol, connector, power supply and wiring requirements.
02
Mechanical installation
Confirm faceplate dimensions, opening, back box, wall or car-panel construction and fixing method.
03
Project configuration
Confirm markings, finish, quantity, display content, button arrangement and any accessibility or special functions.
Selection note: Product images show representative configurations. Production should follow the approved project-specific drawing. Final system integration, local compliance and site acceptance remain subject to the responsible elevator contractor and local requirements.
