Landing Direction Indicator

Price

$34.42

/pc

$35.49

Reference price excluding installation & freight,please consult sales for exact quote

Select Model

SH-LD-302

Product Introduction

SH-LD-302 Elevator Landing Direction Indicator

Name: Landing Direction Indicator
SKU: SH-01310001
Price: 34.42 USD
Availability: InStock

A rectangular landing indicator with upper and lower directional arrows.

The SH-LD-302 corresponds to the BFK212 configuration. Its vertical panel provides a clear up-and-down direction display at the elevator landing.

BFK212 rectangular faceplate with an illuminated upper arrow and lower direction arrow — BFK212 front-panel appearance.

Dimensions

Parameter	Specification
Model	SH-LD-302
Matching designation	BFK212
Faceplate width × height	120 × 220 mm
Dashed outline in front view	105 × 205 mm
Mounting-point spacing	115 mm
Separate side-view reference spans	60 mm and 30 mm

Use the front and side views together when checking the mounting opening and clearance. The 60 mm side-view span is not a stated overall depth including the projecting arrow elements.

Configuration selection

Position designation	Code suffix
Up	-B
Middle layer	-M
Down	-T

Confirm the required position designation, illumination colour and panel finish for your order. The front view illustrates the panel arrangement; select the required lighting configuration to suit the landing system.

Replacement checks

Compare the faceplate dimensions and mounting-point spacing with the existing installation.
Confirm the electrical interface and supply requirements before connecting the indicator.
Specify the required arrow indication, illumination colour and finish when ordering.

Frequently Asked Questions

What configuration is shown for LD-302?

The exact product image shows a stainless-steel landing indicator enclosure with a recessed triangular display window. This confirms the visible construction only; it does not establish hidden ratings or interfaces.

Which panel dimensions and visible functions must match?

Check panel size and cut-out, display orientation and symbols, button or switch layout, finish and mounting method against the approved panel schedule.

Which display and controller interfaces must match?

Confirm display symbols and direction logic, supply, communication interface, connector, mounting dimensions and controller generation from the approved system documents.