+86 021-57676786 News Center Careers
Home / FAQ / How do I specify a stainless steel handrail for an elevator cabin?
← Back to FAQ list

How do I specify a stainless steel handrail for an elevator cabin?

Ask Time: 2024-06-13
Answer
Provide the rail profile, length, finish, bracket spacing and wall construction. Include the required clearance and project load or accessibility requirements. The fixing arrangement is as important as the visible tube, so request a drawing showing how loads reach the cabin structure.
Answer Time: 2024-06-14

Derived Questions

Can an elevator handrail be fixed directly to decorative wall panels?
Only if the panel and its support are designed for the required loads. Thin decorative cladding may need reinforcement behind it. Confirm the cabin wall construction and approved fixing detail before fabrication, rather than choosing screws based only on the visible panel thickness.
Ask Time: 2024-06-15 Answer Time: 2024-06-15
How do I measure an elevator handrail replacement without removing the wall panels?
Record overall length, profile dimensions, projection and visible bracket-center distances, then photograph each fixing. Also obtain the cabin drawing where possible. Concealed fixing and reinforcement details may still require inspection before a replacement can be approved.
Ask Time: 2024-06-16 Answer Time: 2024-06-17
Why does an elevator cabin handrail keep loosening?
The cause may be inadequate backing, damaged fasteners, worn brackets or movement in the wall assembly. Inspect the complete load path before refitting. Repeatedly tightening the same screws will not restore an unsuitable or damaged support structure.
Ask Time: 2024-06-19 Answer Time: 2024-06-19
Can I order an elevator handrail with concealed fixings and matching end caps?
These features must be confirmed for the proposed design. Specify the finish, wall interface, end treatment and service access required. Ask for an assembly drawing and sample finish so the offered rail, brackets and caps form one consistent package.
Ask Time: 2024-06-18 Answer Time: 2024-06-18
What is the difference between a round and flat elevator handrail?
They differ in grip shape, projection, appearance and bracket arrangement. Selection should reflect the users, cabin clearances and project requirements. Evaluate an actual profile sample or dimensioned drawing instead of assuming that equal width gives equivalent usability.
Ask Time: 2024-06-15 Answer Time: 2024-06-15