+86 021-57676786 News Center Careers
Home / FAQ / How do I select a replacement elevator diverting pulley?
← Back to FAQ list

How do I select a replacement elevator diverting pulley?

Ask Time: 2024-01-08
Answer
Provide rope diameter and construction, groove profile, pulley diameter, groove count and spacing, shaft details and imposed loads. Include the existing drawing or label. The replacement must fit the roping design and support arrangement, not only the available mounting space.
Answer Time: 2024-01-08

Derived Questions

What bearing and shaft details are needed to order a diverting pulley?
Provide shaft diameter, bearing designation, fit and retention arrangement, hub dimensions and support layout. Include the pulley load and operating conditions. Confirm whether the quotation covers only the pulley body or a complete assembly with bearings, shaft and retaining components.
Ask Time: 2024-01-12 Answer Time: 2024-01-12
Can an MC nylon elevator pulley replace a cast iron pulley?
A material change requires an engineering review of load, groove design, wear, environment and the approved rope system. Weight reduction alone is not sufficient justification. Request documented suitability for the exact application before substituting a nylon pulley for a metal one.
Ask Time: 2024-01-09 Answer Time: 2024-01-10
Why does an elevator diverting pulley make a repeating noise?
Bearing damage, groove irregularity, alignment problems or another rotating defect can cause cyclic noise. Record how the sound relates to motion and have the assembly inspected. Noise alone does not identify which component needs replacement or establish that operation is safe.
Ask Time: 2024-01-13 Answer Time: 2024-01-14
What drawings should be approved before manufacturing an elevator diverting pulley?
Approve groove dimensions, pitch, diameter, hub and shaft interfaces, material specification and any required guarding features. The designer should verify the drawing against the roping layout. Keep the approved revision with the purchase order so dimensional changes are controlled.
Ask Time: 2024-01-15 Answer Time: 2024-01-15
Why should pulley grooves be inspected when elevator ropes are replaced?
Worn or damaged grooves can affect rope contact and accelerate wear on new ropes. A qualified inspector should assess the pulleys and traction sheave against the applicable equipment criteria. Replacing ropes alone does not correct an unsuitable groove condition.
Ask Time: 2024-01-11 Answer Time: 2024-01-12