+86 021-57676786 News Center Careers
Home / FAQ / How do I distinguish elevator car door panels from landing door panels?
← Back to FAQ list

How do I distinguish elevator car door panels from landing door panels?

Ask Time: 2024-07-09
Answer
Identify where the leaf is installed and which mechanism supports it. Similar finishes do not make car and landing door leaves interchangeable.
Answer Time: 2024-07-10

Derived Questions

Can elevator door panels be ordered with custom glass inserts?
The proposed panel construction must suit the door system and project requirements. Obtain an approved drawing and relevant assembly documentation before production.
Ask Time: 2024-07-12 Answer Time: 2024-07-13
Why does a replacement elevator door panel rub against another leaf?
Panel alignment, dimensions or hanger setup may be incorrect. Inspect the complete opening geometry before modifying the leaf.
Ask Time: 2024-07-12 Answer Time: 2024-07-12
Can I change an elevator door panel from painted steel to stainless steel?
Review mass, thickness and the mechanism's capacity as well as appearance. The complete door assembly must remain suitable after the change.
Ask Time: 2024-07-10 Answer Time: 2024-07-11
Does matching door opening width guarantee a replacement panel will fit?
No. Leaf overlap, mounting, guide details and panel travel also matter. Compare the complete panel and mechanism geometry.
Ask Time: 2024-07-13 Answer Time: 2024-07-14
How should elevator door panels be packed for international shipping?
Protect faces and edges, separate leaves and restrain them against movement. Mark panel identity and orientation to aid installation.
Ask Time: 2024-07-15 Answer Time: 2024-07-16
What measurements are needed to quote a replacement lift door panel?
Provide dimensions, thickness, hanger holes and bottom guide arrangement. Show the opening type and viewing direction on a drawing.
Ask Time: 2024-07-10 Answer Time: 2024-07-10
How do I avoid mismatched finishes when ordering lift door leaves?
Specify finish reference, grain direction and an agreed sample. Confirm whether the replacement must match an existing aged surface.
Ask Time: 2024-07-16 Answer Time: 2024-07-16
What should be verified after installing a new elevator door panel?
Check clearances, travel and the related door functions under the system's commissioning procedure. Appearance alone does not establish a successful replacement.
Ask Time: 2024-07-17 Answer Time: 2024-07-18
Can a dented lift door panel be repaired instead of replaced?
Suitability depends on damage to the structure, guides and assembly function. Have the door specialist assess it before choosing cosmetic repair.
Ask Time: 2024-07-14 Answer Time: 2024-07-15