+86 021-57676786 News Center Careers
Home / FAQ / How do I select an elevator overspeed governor replacement?
← Back to FAQ list

How do I select an elevator overspeed governor replacement?

Ask Time: 2026-07-29
Answer
Provide the governor model, rated and tripping speeds, rope specification, mounting arrangement and safety-gear requirements. Identify the protected direction and any remote functions. The replacement must match the approved safety system, rather than just the pulley size.
Answer Time: 2026-07-29

Derived Questions

What is the difference between a one-way and two-way elevator governor?
A one-way governor is intended to act in a specified direction, while a two-way model supports operation in both directions as documented. The required arrangement depends on the elevator protection design. A two-way description alone does not prove suitability for every safety function.
Ask Time: 2026-07-30 Answer Time: 2026-07-31
What should I specify for an overspeed governor in a machine-room-less elevator?
Include its installation position, service access and required remote testing or reset functions. Provide the rope path and associated safety gear. Confirm the exact mounting and control options for the proposed model instead of assuming that an MRL label defines one standard configuration.
Ask Time: 2026-07-31 Answer Time: 2026-07-31
What documents should I request with a replacement elevator speed governor?
Request the model and serial identification, specified tripping speed, relevant approval documentation and installation instructions. Confirm rope and safety-gear interface requirements and any included remote accessories. Keep the delivered device records with the elevator's maintenance and acceptance documentation.
Ask Time: 2026-08-02 Answer Time: 2026-08-03
Can the tripping speed of an elevator governor be adjusted on site?
Treat tripping speed as a controlled safety setting. Any adjustment must follow the manufacturer's authorized procedure and applicable inspection requirements. Do not use a general field adjustment to make an incorrectly selected governor fit an elevator. Obtain the correctly specified and documented unit.
Ask Time: 2026-08-01 Answer Time: 2026-08-01
Does the governor tensioning device need to match the overspeed governor?
Yes, the rope and tensioning arrangement must meet the governor system's requirements. Check rope specification, tensioning travel, mounting and any slack-rope monitoring. A tensioning device should be selected as part of the system, not solely by the available pit space.
Ask Time: 2026-07-31 Answer Time: 2026-07-31