+86 021-57676786 News Center Careers
Home / FAQ / How do I select a braking resistor for an elevator inverter?
← Back to FAQ list

How do I select a braking resistor for an elevator inverter?

Ask Time: 2026-02-26
Answer
Use the drive manufacturer's permitted resistance range and the application's braking-energy and duty requirements. Check the braking unit, thermal protection and installation environment. A resistor with the same power label may be unsuitable if its resistance or pulse-energy capability differs.
Answer Time: 2026-02-27

Derived Questions

Why does an elevator braking resistor become very hot during operation?
Braking resistors dissipate energy as heat, but abnormal heating can indicate excessive duty, poor ventilation or a control fault. Record the operating pattern and any alarms for a drive technician. Do not reduce the resistance or disable thermal protection to address the symptom.
Ask Time: 2026-02-28 Answer Time: 2026-03-01
Can I replace an elevator braking resistor with a higher wattage model?
Higher power capacity alone does not establish suitability. Resistance, pulse duty, thermal protection and mounting conditions must also fit the drive and application. Have the replacement checked against the inverter documentation, including any restrictions imposed by the braking transistor or external braking unit.
Ask Time: 2026-02-27 Answer Time: 2026-02-28
What should an elevator braking resistor RFQ include?
Provide the inverter and braking-unit models, existing resistor label, resistance, power and duty information if available, plus mounting dimensions. Include the elevator operating pattern and thermal protection arrangement. Request a documented replacement selection rather than a quote based only on physical size.
Ask Time: 2026-03-02 Answer Time: 2026-03-03
Does a regenerative elevator drive still need a braking resistor?
The requirement depends on the complete drive and regeneration architecture. Some systems use different energy-management arrangements or retain braking equipment for particular conditions. Review the manufacturer's circuit design before removing, omitting or adding a resistor.
Ask Time: 2026-03-01 Answer Time: 2026-03-01
What installation space is needed around an elevator brake resistor?
Use the selected resistor's mounting and clearance instructions, considering heat dissipation and nearby cables or combustible materials. Include enclosure ventilation and protective guarding in the design. There is no universal clearance that can be assigned without the resistor model and installation conditions.
Ask Time: 2026-03-02 Answer Time: 2026-03-02