+86 021-57676786 News Center Careers
Home / FAQ / Which cable clamp should I use to support an elevator traveling cable?
← Back to FAQ list

Which cable clamp should I use to support an elevator traveling cable?

Ask Time: 2025-04-28
Answer
Use a support system specified for the actual traveling cable construction, dimensions and suspended load. Some cables require a dedicated support member or grip arrangement. A general electrical cable clamp may not be suitable for carrying the moving cable's weight.
Answer Time: 2025-04-28

Derived Questions

Can I order cable clamps separately from a traveling cable assembly?
Separate supply may be possible, but the support assembly must be confirmed for the exact cable. Send the cable specification with the RFQ and request the supported installation method. Include brackets, grips and fasteners where needed rather than purchasing only the visible clamp body.
Ask Time: 2025-05-03 Answer Time: 2025-05-04
How can I avoid crushing a flat elevator traveling cable with its clamp?
Match the clamp contact profile and size to the cable manufacturer's support requirements. Confirm the installation method and tightening guidance for the selected assembly. Excessive compression can damage conductors or insulation, so secure support should not be achieved by uncontrolled tightening.
Ask Time: 2025-04-28 Answer Time: 2025-04-28
What measurements are needed to quote an elevator cable clamp replacement?
Provide cable width and thickness or diameter, support-member details, suspended length and existing bracket dimensions. Include photos showing how the cable is supported. The quotation should identify both the clamp and the mounting hardware required for the verified load path.
Ask Time: 2025-04-30 Answer Time: 2025-04-30
Why does an elevator traveling cable slip at the support clamp?
An incorrect clamp, damaged support member, unsuitable assembly or installation error may allow movement. Have the cable and support inspected with the elevator safely isolated. Repeated retightening without identifying the cause can further damage the cable and does not verify a sound suspension.
Ask Time: 2025-05-01 Answer Time: 2025-05-02
Are elevator cable clamps interchangeable between round and flat cables?
Usually they require different contact geometry or suspension arrangements. Compare the supported cable type, dimensions, load rating and fixing layout. Request the correct clamp drawing rather than adapting a clamp intended for another cable shape.
Ask Time: 2025-04-29 Answer Time: 2025-04-29