ZH-ENG · Elevator mechanical components
SH-RGS-OX19 Elevator Roller Guide Shoe
Product Reference
SH-RGS-OX19
Specifications
| Parameter | Confirmed value |
|---|---|
| Rated speed | ≤0.63 m/s |
| Guide-rail width | 10 mm |
| Mounting plate | 215 × 140 mm |
| Horizontal mounting-hole spacing | 190 mm |
| Vertical mounting-hole spacing | 100 mm |
| Mounting slots | 4 × 13 × 20 mm |
| Roller diameter callout | Ø80 mm |
| Overall depth callout | 45 mm |
Select by rated speed, 10 mm guide-rail width and the complete mounting drawing. Confirm load capacity and material separately; they are not stated on the manufacturer page.
Technical Drawings
The extracted figure boundaries retain every associated view, dimension line and label. Open the lossless original for dimension reading.
Selection Questions
How should the correct configuration be selected?
Match the exact model, the available specification table and every relevant dimension in the complete drawing; a visually similar component is not sufficient.
Are values not shown here implied by the product family?
No. Load capacity, material, certification and other unstated values require separate supplier confirmation.
Can the technical image be used for installation?
Use it for dimensional review only. Confirm the supplied revision and site interface before manufacture or installation.
